B-G Racing Wheel Alignment Turn Plates - 4t Capacity, Pair
Not Available
Currently unavailable
Currently out of stock
This product is not available at the moment. Check back later or explore other options below.
Product Information
Full details
These B-G Racing Wheel Alignment Turn Plates are designed for mechanics and serious DIY enthusiasts who need to accurately measure caster, camber, and kingpin inclination angles for precise vehicle setup. Their key benefit is providing bind-free wheel movement through a multi-ball bearing system, ensuring accurate alignment readings up to 30 degrees. A potential caveat is their weight and size, requiring adequate storage space.
All features
| Model Part Number | BGR312 |
|---|---|
| Brand | B-G Racing |
Extended Product Information
FAQs
What is the maximum weight capacity per plate?
Each B-G Racing Wheel Alignment Turn Plate has a load capacity of 2000kg, allowing for a total vehicle weight of up to 4000kg when used as a pair.
What angles can these turn plates measure?
These turn plates are designed to accurately measure caster, camber, and kingpin inclination (KPI) angles.
How much rotation do the plates offer?
The plates allow for up to 30 degrees of rotation in each direction.
Are the plates easy to store?
Yes, they feature pre-machined handles and locking pins which facilitate easy storage and transportation.
What material are the turn plates made from?
They are constructed from durable cast aluminium with a black finish.
How should I clean the turn plates?
Wipe them down with a damp cloth after use. Avoid harsh solvents. Ensure the ball bearing area is kept clean and free of debris.
Do I need a special surface to use these plates?
For accurate readings, it is essential to use the turn plates on a clean, flat, and level surface.
Troubleshooting
Plates do not rotate smoothly or feel stiff.
Ensure the surface they are on is perfectly level. Check for debris or dirt in the ball bearing area and clean thoroughly. Inspect for any signs of damage to the bearings.
Inaccurate alignment readings.
Verify the vehicle is positioned correctly on the plates and the vehicle is level. Ensure the vehicle's parking brake is firmly engaged. Confirm the plates are clean and free of obstructions.
Difficulty storing or transporting plates.
Utilize the integrated handles and locking pins as designed. Ensure the locking pins are fully engaged before moving or storing.
Pros and Cons
Pros
- Enables precise measurement of critical suspension angles.
- Zero-bind movement due to ball bearing design enhances accuracy.
- Durable cast aluminium construction ensures a long service life.
- Convenient storage and transport features included.
- Suitable for vehicles up to 4000kg total weight.
Cons
- Each plate weighs 5.6kg, making them relatively heavy.
- Require a flat, level surface for accurate operation.
- Sold as a pair, requiring a two-plate setup for use.
- Need careful handling to avoid dropping due to weight.
Setup, Compatibility & Care
Setup:
- Ensure the vehicle is on a clean, flat, and level surface.
- Position one turn plate under each of the front wheels (or the wheels requiring alignment).
- Carefully drive the vehicle onto the turn plates until the center of the wheel is on the plate.
- Engage the vehicle's parking brake and place it in gear (or Park for automatics).
- If the plates have locking pins, engage them to prevent unwanted movement during initial positioning.
Compatibility:
- Designed for use with vehicles weighing up to 4000kg (2000kg per plate).
- Suitable for most standard tire sizes used on passenger cars and light trucks.
Care:
- Cleaning: Wipe down the plates with a damp cloth after each use to remove dirt, grease, and debris. Avoid harsh solvents that could damage the finish or ball bearings.
- Storage: Utilize the pre-machined handles and locking pins for secure and compact storage. Store in a dry environment to prevent corrosion.
- Inspection: Periodically inspect the ball bearings for smooth operation and check for any signs of damage or excessive wear. Clean any visible debris from the bearing area.