WYELOCK Magnetic Suction Cup Length Adjustable Holder - TG-H9
Not Available
Currently unavailable
Currently out of stock
This product is not available at the moment. Check back later or explore other options below.
Product Information
Full details
This WYELOCK Magnetic Suction Cup Holder (TG-H9) is for drivers seeking a secure and adjustable mounting solution for their devices on a dashboard or windshield. Its key benefit is a strong magnetic hold combined with a reliable suction cup for versatile placement. A potential caveat is the need for a compatible mounting surface for the suction cup to adhere effectively. This holder features powerful N50 magnets and durable construction from PC, ABS, and Silicone materials, offering a convenient and stable accessory for your vehicle.
All features
| Model Part Number | TG-H9 |
|---|---|
| Brand | WYELOCK |
Extended Product Information
FAQs
What type of surfaces can the suction cup adhere to?
The suction cup works best on smooth, clean, and non-porous surfaces such as glass windshields, hard plastic dashboards, and other similar flat surfaces. It may not adhere effectively to textured, matte, or soft surfaces.
Do I need a special case for my phone to use this holder?
Your phone needs to be magnetic or have a metal plate attached to its back or case to work with the magnetic mount. Some phone cases come with built-in metal plates, or you can purchase a separate metal plate to adhere to your case.
How strong are the N50 magnets?
N50 magnets are considered high-strength magnets, providing a secure hold for most standard smartphones and devices under normal driving conditions. However, extremely bumpy roads or sudden impacts could potentially dislodge a device.
Can this holder be used in extreme weather conditions?
While the materials are durable, extreme temperatures (both very hot and very cold) can potentially affect the performance and longevity of the suction cup. It's advisable to position the holder away from direct, prolonged exposure to intense heat or cold if possible.
How do I clean the magnetic surface?
The magnetic surface should be wiped clean with a dry or slightly damp cloth. Avoid using abrasive cleaners or solvents that could damage the finish or the magnets.
Is the holder adjustable?
Yes, the holder is designed with an adjustable grip and arm, allowing you to position your device at various angles for optimal viewing.
Troubleshooting
Suction cup not sticking firmly
Ensure the mounting surface is perfectly clean, dry, and smooth. Moisten the suction cup slightly with water before applying pressure. Check for any debris on the suction cup's rim.
Device falling off the magnetic mount
Verify that your device is compatible with magnetic mounts or has a metal plate attached. Ensure the N50 magnets are properly aligned with a compatible surface on your device or plate. Check if the device is too heavy for the mount.
Holder feels loose after installation
Re-engage the suction cup mechanism to ensure a secure seal. Tighten any adjustable joints on the holder arm if applicable.
Poor magnetic attraction
Make sure there are no obstructions between the magnet and your device's metal surface. If using a phone case, ensure it does not interfere with magnetic strength.
Pros and Cons
Pros
- Strong magnetic hold secures devices effectively.
- Durable materials ensure long-term use.
- Flexible mounting options for dashboard or windshield.
- Adjustable design allows for custom viewing angles.
- Reliable suction cup provides an extra layer of security.
Cons
- Suction cup requires a clean, smooth, non-porous surface to adhere properly.
- Magnetic hold may not be suitable for all device types or weights.
- Extreme temperature fluctuations could potentially affect suction cup performance.
- Requires a metal plate or magnetic-compatible device for attachment.
- May obstruct driver's view if not positioned carefully.
Setup, Compatibility & Care
Setup:
- Clean the mounting surface (dashboard or windshield) thoroughly with a damp cloth and allow it to dry completely.
- Press the suction cup firmly onto the chosen surface.
- Engage the suction mechanism (if applicable, e.g., a lever) to create a vacuum seal.
- Attach your device to the magnetic mount. Ensure your device has a metal backing or attach a metal plate to your device's case.
- Adjust the holder to your preferred viewing angle.
Compatibility:
- Compatible with most smartphones and small GPS devices that are either magnetic or can accommodate a metal mounting plate.
- The suction cup is best suited for smooth, non-porous surfaces like glass or hard plastic dashboards. It may not adhere well to textured or soft surfaces.
Care:
- To clean the suction cup, rinse it under cool water and let it air dry. Avoid using soaps or chemicals.
- Wipe the magnetic surfaces and the holder body with a dry or slightly damp cloth.
- Periodically check the suction cup for dust or debris and clean as needed to maintain optimal grip.