Metz Mecablitz 24 AF-1 Flashgun Speedlight - Nikon
Not Available
Currently unavailable
Currently out of stock
This product is not available at the moment. Check back later or explore other options below.
Product Information
Full details
The Metz 24 AF-1 Nikon is a compact, lightweight external flash designed for Nikon camera users seeking better illumination than their camera's built-in flash. Its key benefit is providing improved light quality and flexibility with TTL auto flash and a swivel reflector, making it ideal for beginners. A caveat is its modest guide number, which may be insufficient for advanced lighting scenarios.
All features
| Brand | Metz |
|---|
Extended Product Information
FAQs
What is TTL flash mode?
TTL stands for Through-The-Lens metering. In this mode, the flash communicates with your camera to measure the light passing through the lens, automatically adjusting the flash output for a correct exposure. It's the most convenient mode for most situations.
Can I use this flash with Sony or Canon cameras?
No, this specific model (24 AF-1 Nikon) is designed exclusively for Nikon cameras and their proprietary flash communication system. Using it on other camera brands will likely result in malfunction or lack of functionality.
How many flashes can I expect on a set of batteries?
With fresh AA batteries, you can expect approximately 250 flashes at full power.
What does 'Guide Number 24' mean?
The guide number (GN) is a measure of flash output. GN 24 for ISO 100 and 35mm focal length means that at ISO 100, the flash can properly illuminate a subject at a distance of approximately 24 meters (about 79 feet) if the lens aperture is set to f/1.0. In practical terms, it indicates the flash's power relative to distance and aperture.
How do I adjust the swivel reflector?
Gently grasp the flash head and tilt it upwards. The reflector can be adjusted up to 90 degrees vertically. Do not force the movement beyond its intended range.
Is this flash suitable for professional studio work?
While it offers flexibility with its swivel head, the GN 24 and lack of advanced manual controls make it best suited for on-camera use, event photography, or as a fill light, rather than primary studio lighting.
Troubleshooting
Flash does not fire
Ensure the flash is securely mounted on the camera's hot shoe. Check that the batteries are correctly inserted and have sufficient charge. Verify the flash and camera are powered on. Confirm compatibility with your specific Nikon camera model.
Flash fires, but exposure is incorrect (too dark or too bright)
Ensure the camera is set to the correct flash mode (TTL is recommended for automatic operation). Check if the camera's exposure compensation or flash exposure compensation settings are affecting the result. Try bouncing the flash off a surface instead of direct flash for softer light.
Autofocus assist beam is not working
Make sure the AF assist light is enabled in your camera's settings. Verify that the flash is properly seated in the hot shoe, as the assist beam often relies on electrical contact.
Recycling time is slow
Weak or depleted batteries can cause slow recycling. Try replacing the AA batteries with fresh, high-quality ones.
Pros and Cons
Pros
- Compact and portable design, easy to carry.
- TTL automatic flash mode simplifies exposure.
- Swivel reflector provides soft, diffused lighting options.
- Integrated autofocus assist beam aids focusing in low light.
- Suitable for beginners looking to upgrade from pop-up flashes.
Cons
- Guide number 24 is relatively low for demanding situations.
- Limited manual power controls.
- Not designed for advanced studio lighting setups.
- May require specific Nikon camera body compatibility for full TTL functionality.
Setup, Compatibility & Care
Setup:
- Insert Batteries: Open the battery compartment on the flash unit and insert four 1.5V AA batteries. Ensure correct polarity.
- Mount on Camera: Slide the flash foot securely into the camera's hot shoe. Ensure it locks into place.
- Power On: Flip the power switch to the 'ON' position.
- Camera Settings: Ensure your Nikon camera is set to recognize an external flash. For TTL mode, the camera will usually handle settings automatically. Check your camera's manual for specific external flash integration.
Compatibility:
- This flash is specifically designed for Nikon DSLR and mirrorless cameras that feature a standard ISO hot shoe and support Nikon's TTL flash system.
Care:
- Cleaning: Wipe the exterior of the flash with a soft, dry cloth. For stubborn smudges, use a slightly damp cloth and then dry immediately. Never use harsh chemicals or solvents.
- Storage: Store the flash in a cool, dry place, preferably in a padded camera bag or its original packaging when not in use.
- Battery Care: Remove batteries if the flash will be stored for an extended period to prevent leakage.
- Reflector Care: Gently wipe the reflector surface with a clean, dry microfiber cloth.