Miele DAS2620 Extractor Hood - Silver

Miele DAS2620 60cm Telescopic Built In Extractor Hood with Stainless Steel (10-ply) Grease Filter,...

Currently unavailable

Currently out of stock

This product is not available at the moment. Check back later or explore other options below.

Product Information

Full details

This guide is for anyone looking to understand and effectively use the Miele DAS2620 extractor hood. This slimline hood offers powerful extraction with a sleek design, keeping your kitchen air clean and fresh. Note that proper installation and adherence to safety guidelines are essential for optimal performance.

All features

ColourSilver
Energy EfficiencyA
Model Part Number11878170
BrandMiele

Extended Product Information

FAQs

How often should I clean the grease filters?

It is recommended to clean the grease filters approximately once a month, or more frequently if you cook frequently and with a lot of grease.

Are the grease filters dishwasher-safe?

Yes, the stainless steel grease filters are dishwasher-safe.

How often should I replace the charcoal filters?

Charcoal filters should be replaced every 6 to 12 months, depending on usage. Refer to your manual for specific recommendations.

What is the CleanCover?

The CleanCover is a smooth, sealed surface behind the grease filters, preventing contact with electrical components and motor, and making cleaning easier and safer.

What is the maximum extraction power?

The maximum extraction power is 410 m³/h.

What type of lighting does the hood use?

The hood uses an LED strip for energy-efficient and bright illumination.

Can I use the hood in recirculating mode?

Yes, it can be used in recirculating mode. However, you need to install charcoal filters (sold separately).

Troubleshooting

Extractor hood not turning on.

Check the power supply and ensure the hood is properly connected to the electrical outlet. Check the circuit breaker.

Poor extraction performance.

Check if the grease filters are clean. Clean or replace them if necessary. Verify the ducting is not blocked (for ducted installations). Check and replace charcoal filters (for recirculating installations).

Hood making excessive noise.

Ensure the hood is securely mounted. Check for any obstructions in the fan or ducting. The noise level is influenced by the fan speed, so reduce the speed if possible.

LED lights not working.

Check the light bulb (LED) and replace if necessary. Consult the manual or contact Miele customer service for further assistance.

Pros and Cons

Pros

  • Efficient grease removal with 10-layer stainless steel filters.
  • Dishwasher-safe grease filters for easy maintenance.
  • CleanCover design for enhanced safety and easy cleaning.
  • Energy-efficient LED lighting.
  • Automatic switch-off for added safety.
  • Sleek and modern design.

Cons

  • Installation requires specific measurements and potentially professional help.
  • May require ducting for optimal performance (in ducted mode).
  • Recirculating mode requires charcoal filters (sold separately).
  • Higher initial cost compared to some other extractor hoods.

Setup, Compatibility & Care

Setup

  1. Installation: The DAS2620 is a semi built-in (pull out) model. Installation should be performed according to the provided instructions. Ensure proper electrical connections and secure mounting.
  2. Ducting: For ducted installations, connect the hood to an exhaust vent leading outside. Ensure the ducting is properly sealed.
  3. Recirculating: For recirculating installations, install charcoal filters (sold separately) to absorb odors. Note that the filters require replacement periodically based on usage.
  4. Minimum Distance: Maintain the minimum distances from the cooktop as specified in the manual, 45 cm for electric hobs and 65 cm for gas hobs.

Compatibility

  • Hob Compatibility: Suitable for use above electric, gas, and induction cooktops.
  • Power: Requires a 230V, 50 Hz power supply.

Care

  1. Grease Filters: The stainless steel grease filters are dishwasher-safe. Clean them regularly (about once a month, depending on usage) to maintain efficiency.
  2. CleanCover: Wipe the CleanCover surface with a damp cloth to remove any grease or debris.
  3. Exterior: Clean the stainless steel housing with a mild detergent and a soft cloth. Avoid abrasive cleaners.
  4. Charcoal Filters: Replace charcoal filters as recommended in the manual (typically every 6-12 months).