Stans NoTubes Biobased Suspension Oil - 5WT - 1000ml
Not Available
Currently unavailable
Currently out of stock
This product is not available at the moment. Check back later or explore other options below.
Product Information
Full details
Designed for mountain bike mechanics and performance-focused riders, Stans NoTubes Biobased Suspension Oil offers professional-grade lubrication for forks and shocks to ensure smoother ride dynamics. This 5WT oil leverages advanced triple-ester technology to reduce internal friction and protect components from wear. While it provides industry-leading thermal stability and corrosion resistance, users must ensure the 5WT viscosity matches their specific suspension manufacturer's requirements to avoid performance issues.
All features
| Model Part Number | NT-LC0010 |
|---|---|
| Brand | Stans NoTubes |
Extended Product Information
FAQs
Is this oil compatible with all suspension brands?
It is compatible with most systems, but you must check your manufacturer's manual to ensure 5WT is the correct viscosity for your model.
Can I mix this with other suspension oils?
It is highly recommended to perform a full fluid exchange rather than mixing, as different base stocks and additive packages may react poorly.
How often should I change my suspension oil?
Refer to your fork or shock manufacturer's service intervals, which usually range from 50 to 200 hours of ride time.
Is the oil safe for rubber seals?
Yes, the formula is designed to be compatible with common seal materials like nitrile and polyurethane.
Why is a biobased oil better for my bike?
It provides the same high-performance lubrication as petroleum-based products while being safer for the environment and your own health.
Troubleshooting
Suspension feels harsh or unresponsive after service
Ensure the correct volume of oil was used and check that no air trapped in the dampers is restricting movement.
Oil leaking from the seals after installation
Verify that the seals are seated correctly and that you did not overfill the fork or shock beyond the manufacturer's maximum volume.
Damping feels too slow or too fast
Confirm that 5WT is the correct weight for your specific damper; if the damping is too slow, you may need a thinner oil, or vice versa.
Pros and Cons
Pros
- Environmentally friendly biodegradable formula
- Reduces internal friction for smoother suspension action
- Excellent heat management in demanding terrain
- Compatible with a wide range of suspension forks and shocks
- High oxidative stability prevents fluid breakdown over time
Cons
- 5WT viscosity may not be suitable for all suspension systems
- Requires professional knowledge to perform internal suspension service
- Larger 1000ml bottle may be more than needed for home casual riders
Setup, Compatibility & Care
Before using this oil, verify that your specific suspension brand requires 5WT weight oil; using the incorrect viscosity can drastically alter your rebound and compression damping profiles. Always perform suspension maintenance in a clean, dust-free environment to prevent debris from entering the seals.
- Drain old fluid: Completely remove the spent oil from the fork lowers or rear shock air can.
- Clean components: Wipe away any residual grime from the inside of the air can or stanchion tubes using a lint-free cloth.
- Measure precisely: Use a graduated syringe or measuring cup to add the exact volume of Stans NoTubes 5WT oil specified by your suspension manufacturer's service manual.
- Seal inspection: While the unit is open, inspect seals for nicks or wear and replace them if necessary.
- Storage: Store the bottle in a cool, dry place with the cap tightly sealed to maintain the integrity of the biobased formula.