CTEK MXT14 Professional Battery Charger - 56-768
Not Available
Currently unavailable
Currently out of stock
This product is not available at the moment. Check back later or explore other options below.
Product Information
Full details
The CTEK MXT14 is a high-performance, professional-grade 24V battery charger engineered for fleet owners, industrial operators, and vehicle maintenance professionals who require reliable power management. It offers a powerful 14A output capable of supporting battery capacities for charging up to 300 Ah and maintenance trickle charging up to 500 Ah, ensuring long-term battery health; however, it is strictly limited to 24V battery systems and cannot be used with 12V batteries.
All features
| Model Part Number | 56-768 |
|---|---|
| Brand | CTEK |
Extended Product Information
FAQs
Can I use the CTEK MXT14 on a 12V battery?
No, the MXT14 is specifically calibrated for 24V battery systems only.
What is the maximum battery size this charger can handle?
It can charge batteries up to 300 Ah and perform maintenance trickle charging on batteries up to 500 Ah.
Is this charger waterproof?
The MXT14 is designed for professional use; while robust, it should be kept dry and protected from rain or water ingress.
Does it have a reconditioning mode?
The MXT14 follows a professional-grade multi-step cycle that includes maintenance stages to help condition the battery.
Can the MXT14 be left connected permanently?
Yes, its intelligent maintenance mode allows it to be left connected indefinitely for trickle charging during long-term storage.
Troubleshooting
Charger does not show any LED indication
Ensure the power cord is securely plugged into an active AC outlet and check the circuit breaker.
Charger indicates a fault light
Disconnect the charger from the battery, check for a reverse polarity connection, and verify the battery voltage is above the minimum required threshold.
Pros and Cons
Pros
- High 14A current capacity for fast charging
- Suitable for very large battery banks up to 500 Ah
- Industrial-grade reliability for heavy-duty applications
- Extends battery service life through proper maintenance cycles
Cons
- Exclusive to 24V systems; not compatible with 12V batteries
- Lacks versatile voltage switching found in smaller consumer chargers
- Requires professional handling due to high power output
Setup, Compatibility & Care
To begin using the MXT14, ensure the battery terminals are clean and free of corrosion. Connect the red clamp to the positive terminal and the black clamp to the negative terminal (or designated chassis ground). Once connected to a stable AC power source, the charger will automatically detect the battery status and begin the appropriate charging stage. Compatibility is strictly limited to 24V lead-acid battery chemistries. For care, keep the unit in a dry, ventilated area and periodically inspect the charging cables for any signs of fraying or heat damage. Do not expose the charger to direct moisture or extreme environmental contaminants.