Liberon Beeswax Liquid - Clear - 5 Litre
Not Available
Not Available
Currently unavailable
Currently out of stock
This product is not available at the moment. Check back later or explore other options below.
Product Information
Full details
The Liberon Liquid Beeswax in Clear (5 Litre) is designed for woodworkers and DIY enthusiasts seeking to nourish and protect absorbent, unsealed woods, particularly in large or dry interior applications like beams, floors, and staircases. Its key benefit is providing authentic protection against dryness while delivering a natural finish. A caveat to consider is its unsuitability for high-moisture areas like kitchens and bathrooms. This product is also EN 71 Part 3 approved, making it safe for use on children's toys.
All features
| Model Part Number | A05B1057 |
|---|---|
| Brand | Liberon |
Extended Product Information
FAQs
Is this product suitable for exterior use?
No, Liberon Liquid Beeswax is intended for interior use only.
Can I use this on a kitchen countertop?
It is not recommended for surfaces that come into frequent contact with water, such as kitchen countertops or bathroom vanities, due to its limitations in high-moisture areas.
How do I know if my wood is absorbent enough?
Unsealed woods like pine, oak, and other softwoods are generally absorbent. You can test by applying a small drop of water; if it soaks in quickly, the wood is absorbent.
What is the drying time before buffing?
The drying time can vary depending on temperature and humidity, but generally, allow 15-20 minutes before buffing. The surface should feel touch-dry.
Does this product offer water resistance?
While it provides some protection against dryness, it does not offer significant water resistance. It is not suitable for wet areas.
Is the clear finish suitable for all wood colors?
Yes, the clear finish is designed to enhance the natural color and grain of the wood without adding or altering its hue.
How often should I reapply the beeswax?
Reapplication frequency depends on usage and environmental conditions. Reapply when the wood begins to look dull or feel dry, typically every 6-12 months for moderate use areas.
Troubleshooting
Wax has thickened and is difficult to apply.
Stand the container in a bowl of hot water for 5 minutes to soften the wax before application. Avoid direct heating.
Uneven finish or streaks after application.
Ensure the wax was applied thinly and evenly. Buff thoroughly with a clean, soft cloth after initial drying to blend the finish.
Wood still feels dry after application.
The wood may be extremely absorbent. Apply a second thin coat after the first has dried and been buffed.
Product doesn't seem to penetrate the wood.
Ensure the wood is adequately absorbent and free from any sealers or finishes that would prevent penetration. Surface may need light sanding if previously sealed.
Pros and Cons
Pros
- Effectively nourishes and protects dry, absorbent woods.
- Provides a natural, authentic finish.
- Generous 5-litre volume is economical for large projects.
- Safe for use on children's toys (EN 71 Part 3 approved).
- Suitable for a wide range of interior wood types.
- Easy to apply in liquid form.
Cons
- Not suitable for areas with high moisture (e.g., kitchens, bathrooms).
- May thicken in cold weather, requiring warming.
- Requires an absorbent, ideally unsealed, wood surface for best results.
Setup, Compatibility & Care Instructions
Preparation: Ensure the wood surface is clean, dry, and free from dust or debris before application. For best results on very absorbent woods, ensure they are unsealed.
Application: Apply the liquid beeswax thinly and evenly using a clean cloth or a brush, working in the direction of the wood grain. Allow it to penetrate the wood for a short period.
Buffing: Once the wax has slightly dried, buff the surface with a clean, soft cloth to achieve a gentle sheen. For very large areas, a floor polishing machine can be used.
Compatibility: Suitable for most hard and soft woods. Not recommended for high-moisture areas like kitchens and bathrooms.
Care in Cold Weather: If the wax thickens in cold conditions, stand the container in a bowl of hot water for approximately 5 minutes to return it to a usable consistency. Do not overheat.
Maintenance: Reapply as needed, typically when the wood begins to look dry or dull.