Tulip Dimensional Fabric Paint - Glitter - Green - 1.25oz

Currently unavailable

Currently unavailable
Tulip Dimensional Fabric Paint in Glitter Green is an ideal choice for both amateur crafters and experienced textile artists looking to add professional-grade, dimensional accents to their DIY projects. The nontoxic, easy-squeeze formula provides reliable adhesion that survives repeated laundering, though users should note that the dimensional effect requires significant drying time to fully cure.
| Model Part Number | 31115 |
|---|---|
| Brand | Tulip |
Yes, once fully cured and heat-set as per instructions, it is designed for permanent adhesion to fabric.
While designed for fabric, it may adhere to paper or wood, but it is optimized for textile fibers.
The paint dries permanent on its own, but always refer to the specific project needs regarding durability.
The glitter provides a standard dimensional sparkle that balances visibility with smooth application.
You should allow the paint to air dry for at least 24 hours before handling or wearing.
Tap the bottle firmly on a flat surface to release trapped air and test on scrap material until the flow is consistent.
Remove the cap and gently clear the nozzle with a thin needle or warm water before replacing the cap securely.
Ensure the fabric was washed without fabric softener before application and allow the full 72-hour wait time before the first wash.
To begin, place a piece of cardboard inside the garment or item to prevent the paint from bleeding through to the back layer. Shake the bottle well before use and test the flow on a scrap piece of fabric to clear the tip of any air bubbles. After application, allow the design to air dry for at least 24 hours. Once cured, wait 72 hours before the first wash; turn the garment inside out and wash on a gentle cycle, then hang dry or tumble dry on low heat.