SmallRig Articulating Arm - 24 cm
Not Available
Not Available
Currently unavailable
Currently out of stock
This product is not available at the moment. Check back later or explore other options below.
Product Information
Full details
The SmallRig 2066B Articulating Arm is designed for photographers and videographers needing a versatile mounting solution for accessories like monitors or lights. Its key benefit is its flexible positioning and secure attachment via 1/4" screws. A potential caveat is that while universal, users should verify compatibility with specific accessory weight limits.
All features
| Brand | SmallRig |
|---|
Extended Product Information
FAQs
What is the primary use of the SmallRig 2066B Articulating Arm?
It's primarily used to mount and position accessories like monitors, LED lights, or microphones onto camera rigs, tripods, or stands using its 1/4" screws.
Does it come with any mounting hardware?
The package contains one 9.5-inch (24cm) Articulating Arm 2066B with 1/4" screws on both ends.
Can I mount a heavy camera on this arm?
This arm is designed for accessories like monitors or lights, not typically for a full camera setup. Always refer to the product's specifications for its maximum weight capacity to avoid damage.
What materials is the arm made from?
The arm is constructed from Aluminium, Stainless steel, and Steel for durability.
How do I adjust the angles?
You can adjust the angles by loosening the ergonomic wingnut, positioning the arm as desired, and then re-tightening the wingnut to secure the position.
Will the 1/4" screw damage my monitor?
No, the 1/4" screw is fitted with a rubber cushion designed to prevent scratches on your monitor or other sensitive accessories.
What is the length of the articulating arm?
The articulating arm is approximately 9.5 inches (24 cm) long.
Troubleshooting
Arm does not hold position firmly
Ensure the ergonomic wingnut is fully tightened. Check that the threads on both the arm and the accessory are clean and properly engaged. For heavier accessories, ensure you are within the arm's recommended weight capacity.
Accessory is loose or wobbly
Verify that the 1/4" screw is fully threaded into the accessory's mount. Clean any dust or debris from the threads. The rubber cushion may slightly reduce grip on some very smooth surfaces; ensure the wingnut is tightened securely.
Difficulty screwing into a mount
Check for any obstruction or damage to the threads on either the arm or the mounting point. Ensure you are aligning the threads correctly before attempting to screw it in.
Pros and Cons
Pros
- Offers flexible positioning for various camera accessories.
- Protective rubber padding prevents damage to mounted equipment.
- Secure locking mechanism with an ergonomic wingnut.
- Durable construction using aluminum, stainless steel, and steel.
- Versatile with 1/4" screws on both ends for broad compatibility.
Cons
- Weight limit should be considered for heavier accessories.
- May require additional adapters for non-1/4" mounting systems.
- The articulating nature might require occasional re-tightening for perfect stability.
Setup, Compatibility & Care
Setup: Simply screw the 1/4" threaded ends into compatible 1/4"-20 female threads on your camera, cage, tripod, or other accessories. Tighten the ergonomic wingnut to secure the attached item and adjust the arm's angles.
Compatibility: This arm is designed with universal 1/4"-20 screws, making it compatible with most camera monitors, LED lights, microphones, and other accessories featuring standard 1/4" mounting points. Always check the weight specifications of both the arm and your accessory to ensure safe operation.
Care: To maintain the arm's functionality, clean it periodically with a dry or slightly damp cloth. Avoid using abrasive cleaners. Ensure the wingnut mechanism remains free of debris. Periodically check that all screws are snug but do not overtighten.