Mill Heat Invisible Smart Wifi Panel Heater - 1300W
Not Available
Not Available
Currently unavailable
Currently out of stock
This product is not available at the moment. Check back later or explore other options below.
Product Information
Full details
The Mill Invisible Smart WiFi Panel Heater (1300W) is designed for homeowners seeking efficient and discreet heating for medium-sized rooms. Its primary benefit is the seamless integration into your home with smart control capabilities, allowing for energy savings and consistent comfort. A potential caveat is its suitability mainly for medium rooms, as larger spaces might require more powerful units. Key features include minimalist Scandinavian design, app control via WiFi, Mill PID Wattage technology for stable temperatures, and Mill Predictive Heating for optimized warm-up times.
All features
| Model Part Number | 1300W |
|---|---|
| Brand | Mill Heat |
Extended Product Information
FAQs
What size room is this 1300W heater best suited for?
The 1300W model is ideal for medium-sized rooms, typically up to approximately 15-20 square meters, depending on factors like insulation and ceiling height.
How does Mill Predictive Heating work?
Mill Predictive Heating learns how quickly your room warms up and then automatically adjusts the start time of the heating cycle so that your room reaches the desired temperature exactly when you want it to, optimizing both comfort and energy efficiency.
Can I control the heater when I'm not at home?
Yes, as long as the heater is connected to your home WiFi and your mobile device has an internet connection, you can control and monitor the heater from anywhere using the Mill App.
Is this heater safe to use in a bathroom?
The heater has an IPX4 rating, meaning it can withstand splashes of water. It is generally safe for use in bathrooms where occasional splashes might occur, but it should not be installed in a zone where it will be directly exposed to running water or excessive moisture.
What happens if the heater overheats?
The heater is equipped with an overheat protection feature. If the unit detects excessive temperatures, it will automatically shut off to prevent damage and ensure safety. Allow it to cool down before attempting to restart.
Does the heater have a physical on/off switch?
Yes, the heater typically has a main power switch in addition to the controls accessible via the app and voice commands. The LED display shows the current operating status.
How do I reset the WiFi connection if it fails?
You can usually reset the WiFi connection by going into the Mill App settings for the device and selecting the option to reconfigure the WiFi, or by performing a factory reset on the heater itself as per the manual (if available) and then re-adding it to the app.
Troubleshooting
Heater not turning on
Check that the power cord is securely plugged into a working outlet. Ensure the main power switch on the heater is in the 'on' position. Verify that overheat protection has not been triggered (allow to cool and reset).
Cannot connect to WiFi / App control not working
Ensure your WiFi network is operational and the heater is within range. Confirm you are using a 2.4GHz network. Try restarting your router and the heater. Re-enter WiFi credentials in the Mill App if necessary.
Inaccurate temperature readings
Ensure the heater is not placed near drafts, direct sunlight, or other heat-generating appliances that could influence the ambient temperature reading. Check for any obstructions blocking the temperature sensor.
Heater shutting off unexpectedly
This could be due to the overheat protection feature activating. Ensure the heater is not covered or obstructed, and that ventilation slots are clear. Allow the unit to cool down completely before attempting to restart.
Voice control not responding
Verify that the heater is correctly linked to your voice assistant account within the Mill App and the respective voice assistant's app. Ensure your voice assistant device is online and functioning properly. Try unlinking and relinking the device.
Pros and Cons
Pros
- Offers advanced smart control features for convenient operation and energy management.
- Sleek, minimalist design that complements modern interiors without being obtrusive.
- Efficient heating technology (PID Wattage and Predictive Heating) helps maintain comfort and reduce energy waste.
- Voice control integration adds a layer of ease-of-use.
- Suitable for various users with features like Commercial Lock and child safety.
Cons
- 1300W output is best suited for medium-sized rooms; may be insufficient for very large spaces.
- Requires a stable WiFi connection for smart features to function.
- Initial setup of the app and WiFi connection might require technical familiarity.
- IPX4 rating means it can handle splashes, but it is not fully waterproof and should not be placed in direct wet areas.
Setup, Compatibility & Care Instructions
Setup:
- Placement: Choose a suitable location on a wall, away from direct drafts or heat sources.
- Mounting: Securely mount the heater to the wall using the provided brackets. Ensure it is level.
- Power On: Plug the heater into a suitable electrical outlet.
- WiFi Connection: Download the Mill App from your device's app store. Follow the in-app instructions to connect the heater to your home WiFi network.
- App Configuration: Set your desired temperature schedules and preferences within the Mill App.
Compatibility:
- WiFi: Requires a 2.4GHz WiFi network for connection.
- Voice Assistants: Compatible with Google Home, Apple Home (via HomeKit), and Amazon Alexa.
- App: Available for iOS and Android devices.
Care:
- Cleaning: Ensure the heater is unplugged and cool. Wipe the exterior with a soft, damp cloth. Do not use abrasive cleaners or solvents.
- Maintenance: Periodically check for dust or obstructions around the vents to ensure optimal airflow. No internal maintenance is typically required by the user.
- Storage: If storing the heater for an extended period, unplug it, clean it, and store it in a dry place.