Model One AM FM Table Radio - Tivoli Audio

Currently unavailable

Currently unavailable
This guide is for anyone who values high-fidelity audio and simple operation in a compact design. The Tivoli Audio Model One AM/FM table radio delivers exceptional sound quality and ease of use, perfect for homes and offices. However, its analog tuning dial may require a bit of patience for precise station selection. This guide covers setup, usage, and troubleshooting to help you get the most out of your Model One radio.
| Brand | Tivoli Audio |
|---|
Use the analog tuning dial to slowly scan the radio frequency band until you find your desired station.
Yes, you can connect your phone using a 3.5mm audio cable via the auxiliary input.
It operates on AC power via the included adapter, or a 12V DC power source.
Use the volume control knob located on the front of the radio.
Yes, there is a headphone output on the back of the radio.
Warranty information is not available.
Place the radio on a stable surface, away from direct sunlight and heat sources, and in a location that provides good radio reception.
Use a soft, slightly damp cloth to clean the cabinet. Avoid using harsh chemicals.
Check the power connection and ensure the outlet is working. Also, verify that the power switch on the radio is turned on.
Extend and adjust the FM antenna wire. Try moving the radio to a different location.
Rotate the radio to find the best AM signal reception. The internal AM antenna may not perform well in all locations.
Ensure the external device is connected correctly and the volume on both the device and the radio is turned up.
Check that the headphones are properly plugged into the headphone jack. The speaker will be muted when headphones are in use.
The Model One is compatible with: