JT Premium Drive Belt For Honda FES 250 1998-2002 - JTB1402
Not Available
Currently unavailable
Currently out of stock
This product is not available at the moment. Check back later or explore other options below.
Product Information
Full details
The JT Premium Drive Belt (JTB1402) is designed for owners of Honda FES 250 scooters (1998-2002) who require a high-quality, reliable replacement for their CVT drivetrain. This belt delivers superior power transfer and enhanced durability through its exact-fit engineering, though owners should note that professional installation is recommended to ensure correct tensioning for optimal transmission performance.
All features
| Model Part Number | JTB1402 |
|---|---|
| Brand | JT |
Extended Product Information
FAQs
Is this belt an upgrade or just a replacement?
It serves as a high-quality OEM-spec replacement that often provides better durability than generic aftermarket alternatives.
How often should I replace the JTB1402?
Follow your Honda owner's manual service intervals, typically recommended every 6,000 to 10,000 miles depending on riding conditions.
Does this belt require a 'break-in' period?
Yes, it is recommended to ride moderately for the first 50 miles to allow the belt to properly seat into the pulleys.
Will this fit a 2003 Honda FES 250?
No, this part is specifically verified for the 1998-2002 model years only.
Can I install this with basic hand tools?
You will need a socket set and a variator holding tool to safely loosen the pulley nut.
Troubleshooting
Squealing noise during acceleration
Check the belt tension and ensure no oil or grease has contaminated the pulley surfaces.
Reduced top speed
Inspect the belt for signs of stretching or width wear; if the belt is too thin, it will not reach the highest drive ratio.
Belt snapping shortly after install
Check the variator and clutch pulleys for sharp burrs or misalignment that may be cutting the belt.
Pros and Cons
Pros
- Precise fit for Honda FES 250 1998-2002 models
- Enhanced thermal resistance prevents premature cracking
- Designed for consistent power delivery across all speed ranges
- Reliable alternative to expensive dealership parts
Cons
- Requires CVT housing removal for installation
- Performance depends heavily on correct variator condition
- Professional installation recommended to prevent misalignment
Setup, Compatibility & Care
Compatibility
This belt is compatible exclusively with Honda FES 250 scooters manufactured between 1998 and 2002. Please verify your vehicle's production year before installation.
Installation
- Remove the outer CVT transmission cover.
- Utilize a variator holding tool to remove the drive pulley nut.
- Carefully slide the old belt off the pulley assembly.
- Clean the pulley faces with a degreaser to ensure a clean surface for the new belt.
- Install the JTB1402 belt and reassemble the housing, ensuring the belt is seated correctly.
Care
To extend the life of your drive belt, avoid 'jackrabbit' starts and heavy idling in stop-and-go traffic, as these create excessive heat. Regularly check for belt fraying or black rubber dust inside the CVT housing every 3,000 miles.