Ener-J Wall Panel - Red White Brick - 1160X300X25mm Pack 2
Not Available
Not Available
Currently unavailable
Currently out of stock
This product is not available at the moment. Check back later or explore other options below.
Product Information
Full details
This guide is for DIY enthusiasts and homeowners looking to quickly add a decorative brick-style feature to interior walls. The Ener-J Red White Brick Wall Panels offer a realistic aesthetic with the ease of installation. A key benefit is their durable yet lightweight construction, allowing for a professional finish without extensive labor. However, they are designed for interior decorative use only and are not suitable for high-moisture areas or as structural elements.
All features
| Model Part Number | 5056865603530 |
|---|---|
| Brand | ENER-J |
Extended Product Information
FAQs
What material are these wall panels made from?
The panels are made from hard Polyurethane (PU).
What are the dimensions of each panel?
Each panel measures 1160 mm in length, 300 mm in width, and 25 mm in thickness.
How many panels are included in a pack?
Each pack contains two wall panels.
Can these panels be used in a bathroom?
No, these panels are not recommended for high-moisture areas like bathrooms or kitchens due to potential damage from humidity and water.
What adhesive should I use?
You will need to use a strong, suitable adhesive designed for wall panels and your specific wall surface. Please refer to the adhesive manufacturer's instructions for best results.
Can I paint over these panels?
While the PU material is durable, painting is not typically recommended as it may alter the brick pattern's definition and the surface finish. It's best to use them as intended with their existing pattern.
Are these panels suitable for exterior use?
No, these panels are designed exclusively for interior decorative use.
Troubleshooting
Panel does not adhere properly
Ensure the wall surface is clean, dry, and free of dust or grease. Verify that a suitable strong adhesive is being used and applied correctly according to its instructions. Press firmly to ensure full contact.
Visible seams between panels
Carefully align each panel edge with the previous one during installation. Ensure panels are cut as accurately as possible. Minor gaps can sometimes be filled with a color-matched filler or caulk if necessary.
Panel surface is scratched
Avoid using abrasive cleaning materials. For minor scratches, a soft cloth and a mild, non-abrasive cleaner might help. Deeper scratches may be difficult to repair without panel replacement.
Panel seems difficult to cut
Use a sharp, fine-toothed saw or a heavy-duty utility knife. Score the panel multiple times for cleaner cuts, especially on thicker sections. Ensure the panel is well-supported during cutting.
Pros and Cons
Pros
- Provides an instant aesthetic upgrade to interior spaces.
- Simulates the look of real brick without the cost and complexity of traditional materials.
- Easy to cut and fit, allowing for custom applications.
- Lightweight nature simplifies installation compared to heavier materials.
- Durable PU material offers good resistance to minor impacts.
Cons
- Limited to interior decorative applications.
- Not suitable for use in bathrooms, kitchens, or other high-humidity environments.
- Requires a clean, flat surface for proper adhesion.
- May not be suitable for areas requiring high impact resistance.
- Can be scratched or damaged if subjected to sharp objects.
Setup, Compatibility & Care
Setup:
- Ensure the target wall surface is clean, dry, and free from dust or grease.
- The surface should be flat and stable. Minor imperfections might need to be addressed before application.
- Panels can be cut to size using a fine-tooth saw or a sharp utility knife. Always measure carefully before cutting.
- Apply a suitable strong adhesive (not included) to the back of the panel or directly to the wall, following the adhesive manufacturer's instructions.
- Press the panel firmly into place, ensuring good contact.
- For subsequent panels, align them closely to minimize visible seams.
Compatibility:
These panels are compatible with most standard interior wall surfaces, including plasterboard, brick, and concrete, provided they are properly prepared and dry. They are *not* recommended for direct application onto flexible or uneven surfaces without proper preparation. Ensure the application area is dry and does not experience condensation.
Care:
Clean the panels with a soft, damp cloth. Avoid using abrasive cleaners, solvents, or scouring pads, as these can damage the surface finish. For stubborn marks, a mild soap solution can be used, followed by wiping with a clean, damp cloth. Ensure the panels are completely dry after cleaning.