Wieland Gesis Classic H-Distributor - 3 Way - 20A - Female
Not Available
Not Available
Not Available
Currently unavailable
Currently out of stock
This product is not available at the moment. Check back later or explore other options below.
Product Information
Full details
The Wieland Gesis Classic H-Distributor (model 375.123) is designed for electricians and system integrators seeking a flexible and tool-free power connection solution for Bachmann products like socket strips. Its key benefit is enabling a quick and reliable 1 input to 3 output power split. A minor caveat is that mounting requires a separately available adapter.
All features
| Model Part Number | 92.030.6953.1 |
|---|---|
| Brand | Wieland |
Extended Product Information
FAQs
What is the maximum current rating for this distributor?
The Wieland Gesis Classic H-Distributor (375.123) is rated for up to 20 Amperes (20A).
Can I mount this distributor directly to a wall?
Direct wall mounting is not supported. A separate adapter is required for mounting purposes.
What does IP20 protection mean?
IP20 indicates that the device is protected against solid objects larger than 12.5mm (like fingers) and is not protected against water. It is suitable for dry indoor environments.
How many devices can I connect to this distributor?
This is an H-distributor with one input and three outputs, allowing you to connect up to three devices or cable runs from a single power source.
Is this product suitable for outdoor use?
No, the IP20 rating means it is not protected against moisture or water ingress and should only be used in dry indoor environments.
What material are the contacts made of?
The contact material is made of copper-zinc alloy (cuZn).
Is installation difficult?
No, the Wieland GST18i3 system is designed for easy, tool-free plug-in installation.
Troubleshooting
No power to connected devices
Verify that the input power source is active. Check that all GST18i3 connections are securely seated at both ends (distributor input, device outputs, and source connection). Ensure the circuit breaker for the power source has not tripped.
Intermittent power loss
Inspect all cable connections for looseness or damage. Ensure the distributor and connected devices are within their rated load capacity (20A). Check for any physical damage to the distributor unit.
Distributor does not click into place
Ensure you are using the correct GST18i3 cable and that the connector is oriented properly. Remove any obstructions or debris from the connection points.
Pros and Cons
Pros
- Streamlines power distribution with a 1-to-3 split.
- Facilitates tool-free, quick installations.
- Compatible with the widely used Wieland GST18i3 system.
- Compact size saves space in installations.
- Durable materials ensure reliable connections.
Cons
- Mounting requires a separately purchased adapter.
- IP20 rating limits use to dry indoor environments.
- Primarily designed for Bachmann products, though compatible with other GST18i3 systems.
Setup, Compatibility & Care
Setup: The Wieland Gesis Classic H-Distributor is designed for straightforward plug-in assembly. Connect the input cable (GST18i3 plug) to the single input socket of the distributor. Then, connect your output devices (e.g., Bachmann socket strips, other GST18i3 compatible equipment) to the three output sockets.
Compatibility: This distributor is part of the Wieland GST18i3 system. Ensure all connecting cables and devices utilize the GST18i3 connector standard for proper fit and electrical function. It is specifically mentioned for use with Bachmann products but is compatible with any GST18i3 compliant device.
Care: Keep the distributor clean and dry. Use a dry or slightly damp (with water only) soft cloth to wipe down the exterior. Ensure all connections are clean and free of dust or debris before plugging them in. Avoid using solvents or abrasive cleaners, as they can damage the plastic housing and internal components.