Loops Pair 6.5" Outdoor Rated Black Stereo Wall Speakers
Not Available
Not Available
Currently unavailable
Currently out of stock
This product is not available at the moment. Check back later or explore other options below.
Product Information
Full details
This guide is for anyone looking to enhance their outdoor or moisture-prone indoor spaces with durable, high-quality audio. The Loops Outdoor Rated Speakers deliver robust sound performance in a weatherproof package, ideal for gardens, patios, or spa areas. A key consideration is that these speakers require a stereo amplifier and are not compatible with 100V systems, and careful attention must be paid to impedance when using multiple pairs.
All features
| Colour | Black |
|---|---|
| Series | Outdoor Rated |
| Model Part Number | LP0002B-65 |
| Brand | Loops |
Extended Product Information
FAQs
Can these speakers be used indoors?
Yes, they can be used indoors, especially in areas prone to moisture like bathrooms or kitchens, due to their weatherproof construction. They perform well as standard indoor speakers too.
What type of amplifier do I need?
You need a standard stereo amplifier. These speakers are 8 Ohm and cannot be used with 100V systems. Ensure your amplifier can handle the impedance load, especially if you plan to connect more than one pair.
How many pairs of these speakers can I connect to one amplifier?
You can connect one pair (2 speakers) to a standard stereo amplifier at 8 Ohms. If you connect two pairs (4 speakers total), the total impedance drops to 4 Ohms, so your amplifier must be rated to safely handle a 4 Ohm load.
Are the mounting brackets included?
Yes, each speaker comes with an adjustable mounting bracket for secure and flexible positioning.
What is the IP rating and what does it mean?
The IP rating is IP55. This means the speakers are protected against dust ingress (5) and protected against low-pressure water jets from any direction (5), making them suitable for outdoor use.
How should I clean the speakers?
Clean the cabinets and grilles with a soft, dry or slightly damp cloth. Avoid using harsh chemicals or abrasive materials.
What is the frequency response of these speakers?
The frequency response is 70Hz - 20kHz, providing a good range of sound from lower-mid frequencies to high frequencies.
Troubleshooting
No sound from speakers
Check that speaker wires are securely connected to both the speakers and the amplifier. Ensure the amplifier is powered on and set to the correct input source. Verify amplifier volume is turned up. Confirm amplifier impedance compatibility (8 Ohm or 4 Ohm if using two pairs).
Distorted or crackling sound
Reduce the volume. Check speaker wire connections for looseness or fraying. Ensure the amplifier is not overdriven (clip light flashing). If using two pairs, confirm the amplifier is rated for 4 Ohm operation.
Low volume output
Increase the volume on your amplifier. Ensure the amplifier's power output is sufficient for the number of speakers connected. Check that the correct speaker wire gauge is used for the distance.
Speakers hum or buzz
Ensure all connections are tight. Try a different amplifier or audio source to rule out interference. Verify grounding is correct if applicable.
Pros and Cons
Pros
- Excellent sound quality for outdoor or challenging environments.
- Durable, weatherproof construction ensures longevity.
- Easy to install with adjustable mounting brackets.
- Stylish and discreet design blends well with surroundings.
- Good power handling for significant volume.
- Compatible with most standard Hi-Fi systems (at 8 Ohms).
Cons
- Only compatible with stereo amplifiers, not 100V systems.
- Impedance drops to 4 Ohms when using two pairs, requiring a 4 Ohm compatible amplifier.
- Bass response might be limited at very low frequencies (70Hz minimum).
- Requires separate speaker wire and amplifier purchase.
Setup, Compatibility & Care
Setup:
- Determine the optimal placement for your speakers, considering sound coverage and protection from direct elements.
- Use the included adjustable mounting bracket to securely attach the speakers to a wall or suitable surface.
- Connect speaker wire from your stereo amplifier's speaker terminals to the speaker terminals on the back of each speaker. Ensure correct polarity (+/-) is maintained.
- Crucially, verify your amplifier's compatibility with the speaker's impedance. These speakers are 8 Ohm. If connecting two pairs (4 speakers total), the combined impedance will be 4 Ohms; ensure your amplifier supports 4 Ohm operation.
- Connect the speakers to a stereo amplifier. These speakers are NOT compatible with 100V systems.
Compatibility:
- Requires a stereo amplifier. Ensure the amplifier can handle the power output (75W RMS recommended) and the final impedance load (8 Ohms per speaker, or 4 Ohms if using two pairs).
Care:
- Wipe the speaker cabinets and grilles with a soft, dry or slightly damp cloth to remove dust and debris. Avoid using abrasive cleaners or solvents.
- Periodically check speaker wire connections for corrosion or damage.
- While weatherproof, prolonged exposure to harsh weather conditions or direct, heavy rain is not recommended. Position them under overhangs or eaves for maximum protection.