Toolcraft Superglue Rapid 150 - 20g
Not Available
Currently unavailable
Currently out of stock
This product is not available at the moment. Check back later or explore other options below.
Product Information
Full details
The Toolcraft Superglue Rapid 150 is designed for DIY enthusiasts and professionals seeking a high-strength, rapid-bonding adhesive for diverse repair projects. Its primary benefit is a near-instant curing time, making it ideal for precision tasks on heavy plastics and various substrates, though users should be mindful that the fast setting time leaves little room for repositioning parts once contact is made.
All features
| Model Part Number | 51-4166 |
|---|---|
| Brand | TOOLCRAFT |
Extended Product Information
FAQs
Does this glue work on all types of plastic?
It is designed for heavy-duty plastics, but some low-energy plastics may require a primer for a successful bond.
How long should I hold parts together?
You should apply pressure for at least 1-3 seconds for an initial bond, though full curing strength usually develops over a few hours.
Is this product water-resistant?
While the bond is strong, it is generally recommended to avoid prolonged immersion in water unless the application is specifically tested for such environments.
Can I use this on porous materials like wood?
Yes, but keep in mind that the glue may soak into the fibers quickly, which might require a slightly larger amount for a secure hold.
What is the best way to store the tube?
Store it in a cool, dry place in an upright position with the cap firmly secured.
Troubleshooting
Glue is not curing within the expected 1-3 seconds.
This often occurs if the surface is too acidic or dirty; clean the surface with a degreaser or apply a bonding primer.
The nozzle tip has become clogged.
Use a small needle to clear the dried glue or carefully trim a small amount off the very end of the nozzle.
Glue will not stick to a specific plastic.
Some plastics, like PE or PP, require a specific primer to bond effectively; verify your material compatibility.
Pros and Cons
Pros
- Extremely fast 1-3 second setting time
- Versatile adhesion for heavy plastics
- Customizable nozzle length for precision application
- Compatible with primers for difficult substrates
Cons
- Very limited repositioning time due to fast cure
- Requires careful handling to avoid accidental skin bonding
- Not suitable for gap-filling applications
Setup, Compatibility & Care
To begin using the Toolcraft Superglue, carefully trim the tip of the nozzle to the desired thickness using a utility knife. Always perform a test on a small, inconspicuous area if unsure about material compatibility.
For optimal care and longevity of the product:
- Keep the nozzle free of dried residue by wiping it clean immediately after use.
- Store the tube upright in a cool, dry, and dark location away from direct sunlight.
- Ensure the cap is screwed on tightly to prevent moisture from entering the tube, which can cause premature curing inside the container.
- When working on non-porous surfaces, ensure they are slightly roughened if possible to increase surface area for the glue.