Wetwall Elite Post Formed Weathered Concrete Shower Wall Panel 2420 x 160mm
Not Available
Currently unavailable
Currently out of stock
This product is not available at the moment. Check back later or explore other options below.
Product Information
Full details
This Wetwall Elite panel is designed for homeowners and designers seeking a durable, stylish, and low-maintenance alternative to traditional tiles, particularly for shower enclosures. Its key benefit is the realistic, textured concrete aesthetic that offers an industrial look without the complexity of tiling. A potential caveat to consider is the need for specific adhesive and sealant for proper installation, ensuring a watertight finish.
All features
| Brand | Wetwall |
|---|
Extended Product Information
FAQs
Can this panel be installed over existing tiles?
It is generally recommended to install directly onto a structurally sound, flat substrate. Installing over existing tiles may not provide a suitable surface and could lead to adhesion issues or an uneven finish. Consult the manufacturer's installation guide for specific advice.
What are the dimensions of the panel?
The panel dimensions are 2420mm in height and 160mm in width.
Is this product suitable for a ceiling application?
This panel is designed for wall applications in high-moisture environments. Ceiling installation is not recommended without specific manufacturer approval and additional support systems.
How do I achieve a watertight seal at corners?
Use the manufacturer's recommended corner profiles or sealants specifically designed for wet wall installations. Ensure all edges are properly sealed according to the installation manual.
What is the best way to clean the textured surface?
Use a soft, damp cloth with a mild, non-abrasive detergent. Rinse well and dry. Avoid abrasive cleaners or tools that could scratch or damage the texture.
Can I install a shower head or faucet directly onto this panel?
Yes, provided you follow the correct procedure for cutting openings and use appropriate sealing methods around the fixture to maintain waterproofing.
What kind of adhesive should I use?
Always use the adhesive recommended by Wetwall for their Elite panels to ensure proper bonding and longevity in a wet environment.
Troubleshooting
Panel appears warped or uneven after installation
Ensure the wall substrate was flat and the adhesive was applied evenly. Allow adequate curing time before exposing to moisture. If warping is severe, the panel may need to be removed and reinstalled.
Water leakage at seams or edges
Verify that the correct Wetwall sealant was used and applied according to instructions. Check for any gaps or insufficient sealant coverage. Reapply sealant if necessary, ensuring a complete watertight barrier.
Surface appears dull or discolored
Clean the panel using a mild, non-abrasive cleaner as per the care instructions. Avoid abrasive pads or harsh chemicals. Ensure all cleaning residue is rinsed off.
Difficulty cutting the panel cleanly
Use a sharp, fine-toothed saw specifically designed for laminate or panel materials. Ensure the panel is securely supported during cutting and consider using a guide for straight cuts.
Pros and Cons
Pros
- Provides a modern, industrial aesthetic.
- Waterproof and resistant to moisture damage.
- Significantly easier to clean and maintain than traditional tile and grout.
- Quicker installation compared to tiling.
- Durable construction for long-lasting use.
- Adds unique character to bathroom spaces.
Cons
- Requires specific adhesives and sealants for optimal performance.
- The textured surface may require more thorough cleaning than a smooth surface to prevent buildup.
- Limited color options within the 'weathered concrete' style.
- May not be suitable for very small or unusually shaped shower areas without careful planning.
- Requires precise cutting for any necessary fixtures or outlets.
Setup, Compatibility & Care
Setup: Ensure the wall substrate is clean, dry, and structurally sound before installation. Use the manufacturer-recommended adhesive and sealant to ensure a watertight seal, especially at joints and edges. Panels should be cut using appropriate tools for wall paneling. Follow specific installation guides provided by Wetwall for post-formed edge application.
Compatibility: This panel is designed for use in wet areas, primarily bathrooms and shower enclosures. It is compatible with standard bathroom fixtures. Ensure any plumbing or electrical access points are properly sealed after installation.
Care: Clean regularly with a soft, damp cloth and mild, non-abrasive detergent. Avoid harsh chemicals or abrasive cleaners that could damage the textured surface. Rinse thoroughly and dry with a clean cloth. For stubborn marks, a diluted solution of white vinegar and water can be used, followed by rinsing and drying.