E-Tech Engineering Quick Align Wheel Mounting Tool - M14 x 1.5mm
Not Available
Currently unavailable
Currently out of stock
This product is not available at the moment. Check back later or explore other options below.
Product Information
Full details
The E-Tech Engineering Quick Align Wheel Mounting Tool is designed for vehicle owners and mechanics who need to mount wheels onto hubs safely and efficiently. Its primary benefit is acting as a guide to prevent wheel damage and ensure proper alignment during installation, with a key caveat being the need to select the correct thread diameter/pitch for your vehicle. This tool simplifies wheel mounting by screwing into a bolt hole, guiding the wheel, and allowing for secure installation before being removed.
All features
| Model Part Number | EWAT-03 |
|---|---|
| Brand | E-Tech Engineering |
Extended Product Information
FAQs
What thread sizes are available for the Quick Align Wheel Mounting Tool?
The E-Tech Engineering Quick Align Wheel Mounting Tool is available in several common thread sizes, including M12 x 1.5mm, M12 x 1.25mm, and M14 x 1.5mm. Always verify the correct size for your vehicle.
Do I need two tools, or can I use just one?
The tool is sold in pairs, and using two can provide extra stability. However, one tool is sufficient to guide the wheel onto the hub, allowing you to then insert the remaining lug bolts.
Can this tool be used on all types of vehicles?
It can be used on any vehicle with standard threaded lug bolt holes. You must ensure you select the correct thread size for your specific vehicle model.
How do I determine the correct thread size for my car?
Consult your vehicle's owner's manual or measure your existing lug bolts. Common sizes are listed, but always confirm the exact specification for your vehicle.
Is this tool a replacement for lug nuts or bolts?
No, this tool is a temporary guide to assist in wheel mounting. It must be removed before the final lug bolts are torqued to specification.
How should I clean the tool?
Clean the tool with a dry or slightly damp cloth. Avoid harsh chemicals or abrasive materials that could damage the threads or finish.
What is the warranty period for this product?
Please refer to the product packaging or E-Tech Engineering's official website for specific warranty information, as it can vary.
Troubleshooting
Tool won't screw into the bolt hole
Ensure you have selected the correct thread size and pitch for your vehicle. The hole may also be damaged; inspect the threads on the hub.
Wheel doesn't align easily onto the tool
Slightly rotate the wheel while attempting to seat it onto the tool. Ensure the tool is screwed in straight and fully.
Tool is difficult to remove after wheel is partly mounted
Ensure the wheel is fully seated against the hub and that the other lug bolts are only finger-tight. Try wiggling the wheel slightly while unscrewing the tool.
Threads on the tool appear stripped
Discontinue use immediately. This indicates the wrong thread size was used or the tool has been damaged. Inspect the corresponding hub threads.
Pros and Cons
Pros
- Significantly eases the process of mounting wheels, especially single-handedly.
- Helps prevent damage to wheel rims and hub studs during installation.
- Accommodates a wide range of vehicles due to multiple thread size options.
- Provides a professional and secure method for wheel alignment.
- Durable construction ensures longevity and repeated use.
- Comes with a storage case for convenience and organization.
Cons
- Requires users to know the specific thread diameter and pitch for their vehicle's lug bolts.
- Not a replacement for proper torque wrench usage; final tightening still requires a torque wrench.
- The tool itself needs to be removed before the final lug bolt can be installed.
- May not be suitable for all types of wheel designs or hub configurations.
- Sold as a pair, which might be unnecessary if only one is needed at a time.
Setup, Compatibility & Care
Setup:
- Identify the correct thread diameter and pitch for your vehicle's lug bolts. Common sizes include M12 x 1.5mm, M12 x 1.25mm, and M14 x 1.5mm. Consult your vehicle's manual or existing lug bolts if unsure.
- Select the appropriate Quick Align Wheel Mounting Tool.
- Screw the tool firmly into one of the wheel hub's threaded bolt holes.
Compatibility:
This tool is compatible with vehicles that use standard threaded lug bolts. Ensure you choose the correct thread size for your specific make and model. Check the available thread options provided by E-Tech Engineering to match your vehicle's requirements.
Care:
- After use, clean the tool with a dry or slightly damp cloth to remove any dirt or debris.
- Store the tools in the provided case to prevent damage and keep them organized.
- Avoid using abrasive cleaners or solvents, as they may damage the tool's finish or threads.
- Periodically inspect the threads for any signs of wear or damage.