WAGO 2001-404 4 Way Insulated Push-in Jumper Bar - 2001 Series - Light grey
Not Available
Currently unavailable
Currently out of stock
This product is not available at the moment. Check back later or explore other options below.
Product Information
Full details
The Wago 2001-404 is a 4-way, push-in type insulated jumper bar designed for use with through terminals from the 2001 Series. It offers a reliable and efficient way to bridge multiple connections within electrical installations, ideal for electricians and engineers seeking a secure and compact solution. While it simplifies wiring, it requires compatible Wago 2001 Series terminals for proper function.
All features
| Model Part Number | 2001-404 |
|---|---|
| Brand | WAGO |
Extended Product Information
FAQs
What is the primary function of the Wago 2001-404?
The Wago 2001-404 is an insulated jumper bar used to create connections between multiple adjacent Wago 2001 Series through terminals, effectively bridging conductors.
What type of terminals is this jumper bar compatible with?
It is designed exclusively for use with Wago 2001 Series through terminals.
What is the maximum current rating for this jumper bar?
The Wago 2001-404 has a maximum current rating of 18 Amperes (18A).
Can I use this jumper bar with other Wago terminal series?
No, this jumper bar is specifically engineered for the Wago 2001 Series and will not be compatible with other Wago terminal series.
Is any special tooling required for installation?
No, the push-in design of the jumper bar and the compatible terminals allows for tool-free installation and removal.
What are the dimensions of the jumper bar?
The jumper bar measures approximately 18.9mm in height, 4.1mm in depth, and 15.5mm in width.
What is the voltage rating?
The voltage rating for this jumper bar is 800 Volts (800V).
Troubleshooting
Jumper bar does not connect securely.
Ensure the jumper bar is fully seated in the terminal block's jumper slots. Verify that you are using compatible Wago 2001 Series terminals and that the conductors are properly stripped and inserted into the terminal.
Circuit intermittently fails after installation.
Check that all conductors are fully inserted into their respective terminals and that the jumper bar is making solid contact. Inspect for any physical damage to the jumper bar or terminal blocks.
Overheating at the connection point.
Verify that the connected conductors are within the specified gauge range for the 18A rating. Ensure the total current draw does not exceed the jumper bar's capacity. Check for loose connections or damaged conductors.
Pros and Cons
Pros
- Tool-free installation significantly reduces wiring time.
- Secure and reliable connections minimize the risk of faults.
- Compact design is ideal for space-constrained electrical panels.
- Insulated construction enhances user safety.
- Compatible with the established Wago TOPJOB® S system.
Cons
- Requires specific Wago 2001 Series terminals for use.
- Limited to 18A current rating, not suitable for high-power applications.
- Light grey color may not match all enclosure aesthetics.
- Primarily designed for through-terminal applications, limiting versatility in some scenarios.
Setup, Compatibility & Care
Setup:
- Ensure the Wago 2001 Series through terminals are properly installed and ready.
- Strip the conductor insulation to the recommended length (refer to terminal block specifications).
- Insert the stripped conductor end directly into the push-in port of the terminal block.
- Push the Wago 2001-404 jumper bar into the designated jumper slots on the connected terminals.
Compatibility:
- This jumper bar is specifically designed for use with Wago 2001 Series through terminals.
- It is rated for a maximum of 18A and 800V.
Care:
- Keep the product clean and free from dust and debris.
- Avoid exposing the jumper bar to excessive moisture or corrosive substances.
- Regularly inspect connections for any signs of damage or wear.