Laser Tools Engineered Acetal Jack Pad for Tesla Model S & X - 8461
Not Available
Currently unavailable
Currently out of stock
This product is not available at the moment. Check back later or explore other options below.
Product Information
Full details
This guide is for Tesla Model S and X owners who need to safely lift their vehicles. The Laser Tools Jack Pad (8461) provides a secure and non-damaging interface between your jack and the vehicle's lifting points, preventing harm to the battery and chassis. A key caveat is that these pads are designed for temporary use and must be removed after lifting.
All features
| Model Part Number | 8461 |
|---|---|
| Brand | Laser |
Extended Product Information
FAQs
Which Tesla models is this jack pad designed for?
This specific jack pad, Laser Part No. 8461, is designed for Tesla Model S and Model X vehicles.
Can I leave the jack pad on my car permanently?
No, the jack pads are not intended for permanent installation and should be removed after use.
What size trolley jack lift pad is required?
The jack pad is suitable for use with a trolley jack that has a lift pad of at least 70mm (2 3/4").
What is the jack pad made of?
It is manufactured from non-compressible and non-marring Acetal plastic with a rubber O-ring.
Does this product come as a set?
Laser Part No. 8461 is for a single jack pad. A 4-piece set is available under Laser Part No. 8440. For Model 3 and Y, see Laser Part Nos. 8460 (1pc) or 8439 (4pc).
How do I clean the jack pad?
Clean the jack pad with a damp cloth after each use and store it in a dry place.
What happens if I use a jack with a smaller lift pad?
Using a jack with a lift pad smaller than 70mm may result in an unstable connection and potential damage to the jack pad or the vehicle's jacking point.
Troubleshooting
Jack pad does not fit securely
Verify you are using the correct pad for your Tesla model (8461 for Model S/X) and ensure it is aligned with the vehicle's jacking point. Check if the jack's lift pad is compatible (min. 70mm).
Vehicle feels unstable during lift
Ensure the jack pad is fully inserted into the jacking point and the trolley jack is centered directly beneath it. Check that the vehicle is on a level surface and the jack is stable.
Jack pad is difficult to remove
Gently twist and pull the pad. Ensure no debris is trapped between the pad and the jacking point. Avoid using excessive force that could damage the pad or vehicle.
Pros and Cons
Pros
- Specifically designed for Tesla Model S and X lifting points.
- Protects the battery and chassis from damage.
- Made from durable, non-damaging Acetal plastic.
- Ensures a stable and secure lift with compatible trolley jacks.
- Easy to insert and remove, preventing permanent alteration.
Cons
- Only compatible with specific Tesla models (S & X).
- Requires a trolley jack with a minimum lift pad size.
- Not intended for permanent installation.
- Sold individually (4pc set available separately).
Setup, Compatibility & Care Instructions
Setup:
- Ensure your trolley jack has a lift pad of at least 70mm (2 3/4").
- Identify the designated jacking points on your Tesla Model S or X.
- Firmly insert the Laser Tools Jack Pad (8461) into the jacking point.
- Position the trolley jack under the jack pad.
- Slowly raise the vehicle, ensuring the jack pad remains centered.
- Important: Remove the jack pad after lowering the vehicle.
Compatibility:
- Vehicle Models: Tesla Model S, Tesla Model X.
- Jacks: Trolley jacks with a lift pad diameter of 70mm (2 3/4") or larger.
Care:
- Clean the jack pad with a damp cloth after each use.
- Store in a dry place.
- Inspect for any damage before each use. Do not use if cracked or damaged.