Clear Gorilla Glue - White - 170ml - 8 Pack
Not Available
Currently unavailable
Currently out of stock
This product is not available at the moment. Check back later or explore other options below.
Product Information
Full details
This 8-pack of 170ml Clear Gorilla Glue is designed for DIY enthusiasts, crafters, and households needing a reliable, high-volume adhesive. Its primary benefit is a strong, waterproof, and crystal-clear bond, ensuring neat and professional results on a variety of materials. The only caveat is that the clear formula may not be ideal for opaque repairs where color matching is critical.
All features
| Colour | White |
|---|---|
| Brand | Gorilla Glue |
Extended Product Information
FAQs
How long does Clear Gorilla Glue take to dry?
Clear Gorilla Glue sets in 30-60 seconds, but full cure time for maximum strength is 24 hours. Clamping is recommended during this period.
Can I use this glue outdoors?
Yes, Clear Gorilla Glue is 100% waterproof and suitable for exterior use and moisture-prone areas.
What is the shelf life of the glue?
Unopened bottles typically have a shelf life of 2 years when stored properly in a cool, dry place. Once opened, it's best to use within 1 year.
How do I clean up dried glue?
Dried Clear Gorilla Glue can be removed by mechanical means such as scraping or sanding. For stubborn residue, a small amount of acetone or mineral spirits may be used on some surfaces, but always test in an inconspicuous area first.
Is this glue safe for food containers?
Clear Gorilla Glue is not rated as food-safe and should not be used on surfaces that come into direct contact with food.
What surfaces can I bond with this glue?
It bonds well to wood, metal, ceramic, glass, stone, foam, and most common household materials. It is not recommended for polyethylene, polypropylene, or PTFE.
Why does the description mention 'White' if the glue is clear?
The 'White' in the product title may refer to the product's packaging or brand line designation rather than the color of the adhesive itself, which is designed to dry clear.
Troubleshooting
Glue is not dispensing
Ensure the nozzle is clear. Check if the cap is fully removed. If the glue has dried in the nozzle, carefully try to clear it with a fine pin or similar tool.
Bond is weak or failing
Verify surfaces were clean and dry before application. Ensure sufficient clamping pressure was applied during the curing process. Check that the glue has been stored correctly and has not expired.
Excessive glue squeeze-out
Apply glue sparingly to one surface. Use clamps to hold pieces together and wipe away any excess wet glue immediately with a damp cloth before it cures.
Glue appears cloudy or milky
This can sometimes occur if exposed to moisture during curing. Ensure the clamped pieces create a tight seal and allow adequate curing time in a dry environment.
Pros and Cons
Pros
- Dries to a clear, non-yellowing finish for aesthetically pleasing repairs.
- Highly durable and waterproof, suitable for demanding environments.
- Non-foaming nature allows for precise application without mess or waste.
- Cost-effective bulk pack for frequent users and workshops.
- Adheres strongly to a wide range of common materials.
Cons
- Not suitable for repairs requiring color matching.
- Drying time can be longer than some other adhesives.
- Requires firm clamping for optimal bond strength during curing.
- Can be difficult to reposition once applied.
- May require ventilation during use due to its adhesive nature.
Setup, Compatibility & Care
Setup: Ensure surfaces to be bonded are clean, dry, and free from dust, oil, or grease. For best results, lightly roughen surfaces if they are smooth. Apply the glue to one surface, then firmly press the two surfaces together. Clamping is recommended for at least 24 hours to allow the bond to fully cure.
Compatibility: Clear Gorilla Glue is suitable for use on wood, metal, ceramic, glass, stone, foam, and most plastics. It is not recommended for use on polyethylene, polypropylene, PTFE, or other similar plastics. Always test on an inconspicuous area first.
Care: Store bottles upright in a cool, dry place, away from direct sunlight and extreme temperatures. Keep the cap tightly sealed when not in use. Clean up any excess wet glue immediately with a damp cloth. Dried glue can be removed mechanically or by carefully scraping.