Warren Reed - Designer Geometric Pattern Kitchen Splashback - W900mm X H650mm
Not Available
Not Available
Currently unavailable
Currently out of stock
This product is not available at the moment. Check back later or explore other options below.
Product Information
Full details
This premium 6mm toughened glass kitchen splashback from Warren Reed - Designer is for homeowners looking to add both style and practicality to their kitchen. Its key benefit is a high-resolution geometric print on durable, easy-to-clean glass that serves as a striking focal point. A potential caveat is the need for a specific adhesive for installation, as drilling is not recommended.
All features
| Model Part Number | WR00047-P453 |
|---|---|
| Brand | Warren Reed - Designer |
Extended Product Information
FAQs
What type of adhesive should I use?
You must use Clear Natural Curing Adhesive. Do not use silicone or other types of adhesive, as they may damage the glass or not provide adequate hold.
Can I drill holes in the splashback for sockets?
No, this splashback is made of toughened glass and cannot be drilled after manufacturing. Installation is designed to be done without drilling.
How do I clean the geometric pattern?
The pattern is printed on the underside of the glass. Clean the front surface with a soft cloth and standard kitchen cleaner. Avoid abrasive materials that could scratch the glass.
What are the dimensions of this specific splashback?
This model is W900mm x H650mm. Other sizes are available.
Is the glass heat resistant?
Yes, the premium 6mm toughened glass is scratch-resistant and can withstand heat up to 400°C, making it suitable for use behind hobs.
What is the warranty period?
The splashback comes with a 1-year guarantee.
Can this be used behind a sink?
While it is water-resistant, it is primarily designed as a kitchen splashback behind cooking areas. Prolonged direct contact with water, especially from a sink, is not its intended use.
Troubleshooting
Splashback not adhering to the wall
Ensure the wall surface was clean, dry, and perfectly smooth before application. Verify that the correct type and amount of Clear Natural Curing Adhesive were used and allowed to cure fully.
Scratches or damage during cleaning
Only use soft cloths and non-abrasive cleaners. Avoid scouring pads or abrasive cleaning agents. If scratches are present, they are likely superficial and may diminish with a good quality glass cleaner.
Visible adhesive marks
Ensure the adhesive used is 'Clear Natural Curing' and that excess has been wiped away immediately after application before it cures. If it has already cured, it may require careful removal by a professional.
Pros and Cons
Pros
- Enhances kitchen aesthetics with a stylish geometric design.
- Durable and resistant to scratches and heat.
- Hygienic and very easy to maintain cleanliness.
- Simple installation process without the need for drilling.
- Provides a protective barrier against cooking splatters.
Cons
- Requires specific Clear Natural Curing Adhesive for installation.
- Glass can be heavy, requiring careful handling during installation.
- Limited to kitchen use; not suitable for other areas.
- Repairing chips or cracks is not typically feasible.
Setup, Compatibility & Care
Setup:
- Ensure the wall surface is clean, dry, and smooth.
- Apply Clear Natural Curing Adhesive evenly to the back of the glass or the wall surface, following the adhesive manufacturer's instructions.
- Carefully position the splashback onto the wall, pressing firmly to ensure good adhesion.
- Allow the adhesive to cure completely as per its guidelines before use.
Compatibility:
This splashback is designed for use behind standard kitchen hobs (gas, electric, induction). It is compatible with most kitchen wall types when using the recommended adhesive. It is not intended for use as a countertop or a backsplash behind sinks where constant water exposure is expected.
Care:
Clean regularly with a soft, damp cloth and a mild, non-abrasive kitchen cleaner. Avoid using abrasive pads or harsh chemicals that could scratch or damage the glass surface or printed design. For stubborn marks, a glass cleaner can be used.