Grass Warehouse Wetfix Artificial Grass Adhesive - Green
Not Available
Currently unavailable
Currently out of stock
This product is not available at the moment. Check back later or explore other options below.
Product Information
Full details
The Grass Warehouse Wetfix Artificial Grass Adhesive is an essential solution for both DIY enthusiasts and professional landscapers seeking a permanent, high-strength bond for their turf installations. Its primary benefit is a weather-resistant formula that maintains integrity in extreme temperatures and moisture, ensuring your lawn stays secure in the unpredictable UK climate; however, users should be aware that once cured, this adhesive creates an extremely permanent bond that may require significant effort if repositioning is needed.
All features
| Colour | Green |
|---|---|
| Model Part Number | 1392466 |
| Brand | Grass Warehouse |
Extended Product Information
FAQs
Can this be used on damp surfaces?
While it is moisture-resistant once cured, it is highly recommended to apply the product to a clean, dry surface to ensure the strongest initial bond.
How long does it take to cure?
Curing times depend on ambient temperature and humidity; usually, it is touch-dry within hours but reaches full structural strength within 24 to 48 hours.
Is this adhesive suitable for high-traffic areas?
Yes, it is designed for durability and is suitable for both residential lawns and high-traffic sports areas.
What tools do I need for application?
You will require a standard heavy-duty caulking gun and a utility knife for cutting the nozzle and trimming your turf.
Can it be used on wood decking?
Yes, this adhesive works well on properly prepared timber or wooden decking surfaces.
Does the green colour show through the seams?
When applied correctly between two pieces of turf, the colour is designed to blend into the grass backing, making it discreet.
Troubleshooting
Adhesive is not coming out of the tube
Ensure the nozzle is cut to the appropriate width and check that the seal at the base of the nozzle has been fully punctured.
Turf edges lifting after installation
The surface may have been damp or dirty during application; ensure the surface is clean and dry, then re-apply pressure or add additional weight until cured.
Visible adhesive on the grass blades
Wipe away excess adhesive immediately with a clean cloth before it cures; once cured, it is extremely difficult to remove.
Pros and Cons
Pros
- Excellent moisture resistance for UK weather
- Strong, permanent bond for long-term stability
- Suitable for a variety of surfaces like concrete and timber
- Reliable performance under direct sunlight and temperature shifts
Cons
- Permanent bond makes corrections difficult after curing
- Requires proper surface preparation for optimal results
- Not intended for removable or temporary installations
Setup, Compatibility & Care
To achieve the best results, ensure the substrate is clean, dry, and free of dust or oils before application. Apply the adhesive using a standard heavy-duty caulking gun, keeping a steady pressure to ensure a uniform bead. If joining two pieces of grass, use a joining tape as a backing, applying the adhesive directly to the tape.
Compatibility includes concrete, timber, and stone surfaces commonly found in gardens and outdoor areas. Once applied, apply even pressure to the grass surface to ensure total contact with the adhesive. Allow sufficient time for the product to cure completely based on ambient humidity levels before subjecting the area to heavy foot traffic or high-intensity activity.