PlastiKote Radiator Paint - White Gloss - 400ml
Not Available
Not Available
Currently unavailable
Currently out of stock
This product is not available at the moment. Check back later or explore other options below.
Product Information
Full details
This guide is for anyone looking to refresh their radiators and heating pipes with a durable, gloss white finish. The PlastiKote Radiator Paint provides a quick and easy solution, eliminating brush marks and offering heat resistance up to 110°C. Note that while this paint is fast-drying, proper surface preparation is key for optimal results.
All features
| Colour | White |
|---|---|
| Model Part Number | 071016 |
| Brand | PlastiKote |
Extended Product Information
FAQs
How much area does one can cover?
A 400ml can covers up to 1.75m².
How long does it take to dry?
It is touch-dry in approximately 10 minutes.
What surfaces can I use this paint on?
It can be used on wood, metal, aluminium, glass, stone, and various types of plastic.
Is this paint heat resistant?
Yes, it is heat resistant up to 110°C.
Do I need to prime the surface before painting?
Priming is not always required, but it can improve adhesion and the final finish. Ensure the surface is clean and prepared according to the instructions.
Can I use this on a hot radiator?
No, allow the radiator to cool completely before applying the paint.
What is the finish like?
It provides a gloss white finish.
Troubleshooting
Paint is running or dripping.
Apply thinner coats and ensure the can is held the correct distance from the surface.
Paint is not adhering properly.
Ensure the surface is clean, dry, and properly prepared. Lightly sand glossy surfaces.
The finish is not smooth.
Apply even coats and avoid spraying too heavily in one area.
Pros and Cons
Pros
- Quick drying time minimizes downtime.
- Heat resistance prevents discoloration and damage.
- Easy application with no brush marks ensures a professional finish.
- Durable and scratch-resistant, prolonging the lifespan of the painted surface.
Cons
- Requires proper surface preparation for optimal adhesion.
- Coverage may vary depending on the surface and application technique.
- Aerosol application may require masking to protect surrounding areas.
- Limited to a gloss white finish; other color options are not available.
Setup, Compatibility & Care
- Surface Preparation:
- Ensure the surface is clean, dry, and free from rust, loose paint, and grease.
- Lightly sand glossy surfaces to improve adhesion.
- Application:
- Shake the can well for at least two minutes before use.
- Hold the can 10-12 inches from the surface and spray in even strokes.
- Apply multiple thin coats, allowing each coat to dry for 10 minutes.
- Compatibility:
- Suitable for use on wood, metal, aluminium, glass, stone, and some plastics.
- Check for compatibility on plastics before full application.
- Care:
- Clean with a damp cloth.
- Avoid using abrasive cleaners or solvents.
- For best results, allow the paint to fully cure before exposing it to high heat or heavy use.