Currently unavailable
This product is not available at the moment. Check back later or explore other options below.
The Vivo STAND-V002C is an ideal solution for office professionals and remote workers seeking to maximize desk space by elevating their monitor and laptop simultaneously. This robust mount offers exceptional flexibility, supporting screens up to 32 inches and laptops up to 17 inches with a secure, ergonomic setup. While it significantly improves desk organization and posture, users should note that the assembly process requires precise tightening of the tension bolts to ensure the arm maintains its position under the combined weight of your hardware.
| Model Part Number | STAND-V002C |
|---|---|
| Brand | Vivo |
Yes, as long as the monitor has a 75x75mm or 100x100mm VESA pattern and weighs under 22 lbs.
It is recommended to use the grommet mount for desks with beveled edges to ensure a flat, secure contact point.
Yes, the laptop tray attaches via a VESA plate, allowing you to swap it out for a second monitor if desired.
The vertical height is adjustable along the length of the central pole, which provides several inches of adjustment depending on your mounting position.
The package includes the necessary hardware; however, you will need a standard screwdriver for the VESA plate attachment.
Locate the tension adjustment screw on the arm joint and tighten it clockwise until the arm maintains your chosen position.
Ensure you are using the correct bolt holes on the clamp bracket. If the desk is too thin, use a piece of wood or spacer to create a stable surface for the clamp.
Adjust the tension of the VESA plate swivel screw until the monitor offers enough resistance to hold its orientation.
Before starting, ensure your desk thickness is within the 10.2 cm limit and that the mounting surface is solid enough to support the clamp load. 1. Assemble the central pole and clamp base according to the desired installation method (C-clamp or grommet). 2. Attach the VESA plate to your monitor. 3. Secure the arm onto the pole and adjust the height to your preference using the locking bolt. 4. Tighten the tension screws at the joints; if the arm drifts downward, tighten the screws clockwise until the desired level of resistance is achieved. To care for the mount, periodically check the clamp bolts to ensure they remain snug, and wipe down the arm with a dry, lint-free cloth to remove dust.
