DecoArt Americana Pearls Paint - Coral - 2oz

Currently unavailable

Currently unavailable
This guide is for crafters looking to add a subtle shimmer and vibrant color to their projects. The key benefit is achieving a soft, pearlescent finish on various surfaces. A potential caveat is that the pearlescent effect is most pronounced on smooth, non-porous surfaces. DecoArt Americana Pearls Paint in Coral offers a lustrous finish, building on the trusted Americana brand with a unique shimmer. It's ideal for adding a touch of elegance to wood, walls, canvas, terra cotta, paper, Styrofoam, and unglazed ceramics.
| Model Part Number | DAP316-30 |
|---|---|
| Brand | DecoArt |
Soft synthetic brushes work well for smooth application. You can use flat brushes for broader areas or round brushes for details. Ensure your brush is clean before use.
Yes, Americana Pearls can be mixed with other Americana acrylic paints to create custom colors with a pearlescent finish.
This depends on the surface and desired effect. Typically, one to two coats are sufficient for a shimmering effect. For full opacity of the base color, multiple coats may be needed, similar to traditional acrylics.
While durable once dry, this paint is primarily intended for indoor craft and decor projects. For outdoor applications, it's recommended to seal the finished piece with a durable, exterior-grade sealant.
Drying time varies based on application thickness and environmental conditions (humidity, temperature). Typically, it is touch-dry within 20 minutes and ready for a second coat or handling within 2 hours. Full cure can take several days.
Americana Pearls paint is not specifically formulated for fabric. For fabric applications, DecoArt recommends their Americana Fabric Paints.
When used indoors and properly cared for, the pearlescent finish should maintain its luster. Prolonged exposure to direct sunlight or harsh cleaning can degrade the finish over time.
Add a very small amount of water (a drop or two at a time) and stir thoroughly. Do not over-thin, as this can affect adhesion and shimmer.
Ensure smooth, even application with consistent brush strokes. Apply a second coat if necessary, allowing the first coat to dry completely. Consider the base surface; smoother surfaces yield more uniform shimmer.
Verify the surface was properly cleaned and dried before application. For porous or difficult surfaces, apply a suitable primer or sealer before painting.
The pearlescent effect is subtle. Ensure good lighting when viewing. Applying over a darker or contrasting base color can enhance the shimmer. Multiple thin coats may also increase vibrancy.
Setup: No special setup is required. Ensure your project surface is clean, dry, and free from dust, grease, or wax. For porous surfaces like unglazed ceramic or raw wood, applying a primer or sealer first can improve adhesion and color vibrancy.
Compatibility: This paint is designed for use on wood, walls, canvas, terra cotta, paper, Styrofoam, and unglazed ceramics. It is water-based and can be used alongside other DecoArt Americana acrylic paints. Avoid mixing with incompatible mediums or solvents not recommended by the manufacturer.
Care: Clean brushes and tools immediately after use with soap and water. Once dry, the paint is water-resistant and durable. For painted surfaces, gentle cleaning with a soft, damp cloth is recommended. Avoid abrasive cleaners or harsh scrubbing, which can damage the finish.