Leyland Trade Super Leytex White Matt Emulsion Paint - White
Not Available
Currently unavailable
Currently out of stock
This product is not available at the moment. Check back later or explore other options below.
Product Information
Full details
This guide is designed for professionals and DIY enthusiasts seeking a high-quality, quick-drying matt finish for interior walls and ceilings. Leyland Trade Super Leytex Matt offers a full-bodied, permeable film that allows new plaster to breathe and dry, providing excellent coverage and a smooth, even finish. However, be aware that the final shade may vary slightly depending on the surface and lighting conditions.
All features
| Colour | White |
|---|---|
| Brand | Leyland Trade |
Extended Product Information
FAQs
What surfaces can I use Leyland Trade Super Leytex Matt on?
It is suitable for interior walls and ceilings, including plaster, drywall, and previously painted surfaces.
How many coats of paint should I apply?
For best results, apply two coats, allowing the first coat to dry completely before applying the second.
How long does the paint take to dry?
The paint is quick-drying. Refer to the product label for specific drying times.
How do I clean up after painting?
Clean up spills and splatters immediately with warm, soapy water. Avoid harsh chemicals.
Do I need to prime the surface before painting?
Yes, prime bare surfaces with an appropriate primer for better adhesion and a more even finish.
Can I use this paint on exterior surfaces?
No, this paint is designed for interior use only.
How do I store leftover paint?
Store the paint in a cool, dry place, away from direct sunlight and extreme temperatures. Ensure the container is tightly sealed.
Troubleshooting
Paint is not adhering properly.
Ensure the surface is clean, dry, and free from contaminants. Prime bare surfaces before painting.
Paint is showing brush marks or roller marks.
Apply the paint evenly, avoiding excessive build-up. Use a good quality brush or roller.
Colour is not consistent.
Ensure the paint is thoroughly mixed before application. Apply an even coat and avoid applying too thinly.
Pros and Cons
Pros
- Excellent coverage, saving time and paint.
- Quick drying time allows for faster project completion.
- Matt finish provides a non-reflective, modern aesthetic.
- Permeable film is ideal for new plaster, allowing it to breathe and dry properly.
- Easy to apply, suitable for both professionals and DIY enthusiasts.
Cons
- May require multiple coats for optimal coverage on some surfaces.
- Colour accuracy can be affected by the surface and lighting.
- Not suitable for exterior use.
Setup, Compatibility & Care
Surface Preparation
- Ensure the surface is clean, dry, and free from loose material.
- Fill any cracks or holes with a suitable filler and sand smooth.
- For new plaster, allow sufficient time to dry before painting.
- Prime bare surfaces with an appropriate primer.
Application
- Stir the paint thoroughly before use.
- Apply two coats for best results, allowing the first coat to dry before applying the second.
- Use a brush or roller suitable for emulsion paints.
- Apply in even strokes, avoiding excessive build-up.
Compatibility
- Suitable for use on interior walls and ceilings.
- Compatible with most common interior surfaces, including plaster, drywall, and previously painted surfaces.
Care
- Clean up spills and splatters immediately with warm, soapy water.
- Avoid harsh chemicals or abrasive cleaners.
- For general cleaning, wipe down the surface with a damp cloth.