NES Home Grey Concrete PVC Panels - 2400 x 1000 x 10mm

PVC bathroom cladding offers a cost-effective and user-friendly alternative to traditional tiling ...

Currently unavailable

Currently out of stock

This product is not available at the moment. Check back later or explore other options below.

Product Information

Full details

This guide is for homeowners and DIY enthusiasts looking for a quick, waterproof, and stylish bathroom makeover solution. The key benefit is a dramatic, easy-to-clean finish that rivals traditional tiling, offering a 100% waterproof surface. A potential caveat is that these panels are primarily recommended for wall applications, not floors. NES Home Grey Concrete PVC Panels provide a cost-effective, user-friendly alternative to tiling, featuring a hygienic, mould-free, and wipeable surface with added insulation and soundproofing. The panels offer a dramatic grey concrete aesthetic for walls and ceilings.

All features

BrandNES Home

Extended Product Information

FAQs

Are these panels suitable for a shower enclosure?

Yes, these panels are 100% waterproof and specifically designed for use in high-moisture environments like shower enclosures.

Can I install these panels over existing tiles?

Yes, provided the existing tiles are securely fixed, clean, and the surface is level, you can install the PVC panels directly over them.

How do I clean the grey concrete panels?

Clean the panels with a soft, damp cloth and a mild detergent. Avoid using abrasive cleaners or solvents.

What is the main advantage over traditional tiles?

The main advantages are easier and faster installation, a completely waterproof surface without grout lines, and lower maintenance.

Can these panels be used on the ceiling?

While primarily recommended for walls, they can be used on ceilings if securely fixed and appropriate supports are used, especially in moisture-prone areas.

Are the panels soundproof and insulated?

Yes, the PVC material provides additional insulation and soundproofing benefits compared to standard wall finishes.

What are the dimensions of the panels?

The dimensions are 2400mm in length, 1000mm in width, and 10mm in thickness.

Troubleshooting

Panels do not adhere well

Ensure the wall surface is clean, dry, and free from dust or grease. Use the recommended adhesive and apply it evenly according to manufacturer instructions.

Cutting the panels results in a rough edge

Use a fine-toothed saw or a very sharp utility knife. Score the surface deeply multiple times if using a knife before snapping the panel.

Water seeps behind the panels

Verify that all edges and joints are properly sealed with appropriate waterproof sealant or trims. Ensure panels are fitted tightly against the wall and each other.

Panel surface is scratched

Handle panels with care during installation. If minor scratches occur, they may be difficult to remove. For significant damage, panel replacement might be necessary.

Pros and Cons

Pros

  • Provides a completely waterproof finish, ideal for bathrooms.
  • Significantly easier and quicker to install than traditional tiles.
  • Low maintenance due to its wipeable and mould-free surface.
  • Offers a modern and stylish aesthetic with the grey concrete design.
  • Adds a layer of insulation and soundproofing.
  • Made from durable, recyclable PVC.

Cons

  • Primarily designed for wall applications; not suitable for flooring.
  • May require specific cutting tools for a precise fit.
  • The panel finish might not appeal to those preferring a traditional tile look.
  • Requires careful handling during installation to avoid scratching the surface.
  • Not intended for use in extreme heat or direct flame exposure.

Setup, Compatibility & Care

Setup:

  1. Preparation: Ensure the wall surface is clean, dry, and free from dust, grease, or loose material. Minor imperfections can often be covered by the panels, but significant damage should be repaired first.
  2. Cutting: Panels can be cut using a fine-toothed saw or a sharp utility knife. Measure carefully and use a straight edge for accurate cuts.
  3. Installation: Panels are typically adhered to the wall using a suitable waterproof adhesive or can be mechanically fixed with screws, often hidden by subsequent panels or trims. Ensure panels are level and fit snugly together.
  4. Finishing: Use PVC trims or sealant for a clean finish around edges, corners, and where panels meet fixtures.

Compatibility:

  • Surfaces: Compatible with most standard wall substrates including plasterboard, existing tiles (ensure they are sound), and brickwork.
  • Environment: Specifically designed for bathroom and wet room environments.
  • Limitations: Not suitable for use as flooring or in areas of extreme heat.

Care:

  • Clean regularly with a soft, damp cloth and mild detergent. Avoid abrasive cleaners or harsh chemicals that could damage the surface.
  • Wipe up spills immediately to maintain the hygienic properties.