Honeywell Room Thermostat - T6360B1028
Not Available
Currently unavailable
Currently out of stock
This product is not available at the moment. Check back later or explore other options below.
Product Information
Full details
The Honeywell T6360B1028 is a mains voltage room thermostat designed for domestic wet central heating systems, offering reliable automatic temperature control. It is suitable for directly controlling pumps or boilers, or operating zone valves. While it provides straightforward temperature management, users should be mindful of its maximum electrical load limitations.
All features
| Model Part Number | T6360B1028 |
|---|---|
| Brand | Honeywell |
Extended Product Information
FAQs
What is the maximum electrical load the T6360B1028 can handle?
The T6360B1028 can handle a maximum electrical load of 10 Amperes resistive or 3 Amperes inductive.
Can this thermostat be used for cooling systems?
Yes, the T6360B1028 can also be used for cooling applications.
Do I need a qualified electrician to install this thermostat?
Yes, due to mains voltage connections, installation should always be performed by a qualified electrician.
What types of heating systems is it compatible with?
It is designed for domestic wet central heating systems, controlling circulating pumps, boilers, or zone valves.
Are there versions for higher electrical loads?
Yes, a high current version is available for electrical heating systems that require a greater load capacity.
Does this thermostat have programming features?
The standard T6360B1028 is a basic thermostat and does not feature programming functions. Setback and indicator lamp versions are available.
How should I clean the thermostat?
Wipe the thermostat gently with a soft, dry cloth. Avoid using liquid cleaners or solvents.
Troubleshooting
Thermostat does not turn the heating on/off
Check that the thermostat is receiving mains voltage. Verify wiring connections to the boiler or pump. Ensure the set temperature is above the room temperature for heating mode.
Heating system runs continuously
Check the wiring connections to ensure the thermostat is correctly switching the system. The internal switch may be faulty; consult a qualified technician.
Inaccurate temperature readings
Ensure the thermostat is not located near heat sources (radiators, sunlight) or drafts. Clean any dust from the vents. Allow the thermostat time to acclimatize after installation or significant temperature changes.
System cycles too frequently
This may indicate the thermostat's position is too close to the heat source it controls, or the differential setting (if applicable on a specific model) is too narrow. Ensure proper installation location.
Pros and Cons
Pros
- Provides reliable automatic temperature control for central heating.
- Can directly control key components of a heating system.
- Versatile for both heating and cooling applications.
- Simple to operate and integrate into existing systems.
Cons
- Limited to a maximum electrical load of 10A resistive / 3A inductive.
- May require a separate high current version for certain electrical heating systems.
- Basic functionality; lacks advanced programming features found in smart thermostats.
Setup, Compatibility & Care Instructions
Setup: Installation should be performed by a qualified electrician. Ensure the thermostat is mounted on an internal wall, away from direct sunlight, drafts, or heat sources to ensure accurate temperature readings. Connect the mains voltage supply and the control wiring to the appropriate terminals according to the wiring diagram provided with the unit.
Compatibility: This thermostat is designed for mains voltage operation and is compatible with most domestic wet central heating systems, including those with circulating pumps, boilers, or spring return/motor open/motor close zone valves. Note the electrical load limits (10A resistive, 3A inductive) and consult the product manual for specific system compatibility.
Care: Keep the thermostat clean by wiping it gently with a soft, dry cloth. Avoid using abrasive cleaners or solvents. Ensure vents on the thermostat are not obstructed to allow for proper air circulation and accurate temperature sensing. No user-serviceable parts are inside; refer servicing to qualified personnel.