Cure It Hardener - Winter Grade 5Kg
Not Available
Currently unavailable
Currently out of stock
This product is not available at the moment. Check back later or explore other options below.
Product Information
Full details
This guide is for users of Cure It Winter Grade Hardener, a product designed to enhance the performance of Cure It resin and topcoats, especially in cooler weather. The key benefit is its ability to ensure a durable and long-lasting finish on fibreglass roofs. However, it's essential to follow the mixing instructions carefully to achieve the best results. This guide will provide you with the information you need to effectively use the hardener for optimal performance.
All features
| Brand | Cure It |
|---|
Extended Product Information
FAQs
What is the recommended mixing ratio for Cure It Winter Grade Hardener?
The recommended mixing ratio is between 1% and 2% of hardener to Cure It resin.
What temperature range is this hardener suitable for?
This hardener is specifically designed for use in cooler conditions. Refer to the product instructions for the recommended temperature range.
Can I use Cure It Winter Grade Hardener with other brands of resin?
No, it is designed for use with Cure It resin and topcoat only.
How should I store the hardener?
Store the hardener in a cool, dry place, away from direct sunlight and heat sources.
What safety precautions should I take when using this product?
Wear appropriate protective gear, including gloves and eye protection, during mixing and application. Ensure adequate ventilation.
How long does it take for the mixture to cure?
Curing time varies depending on the temperature and humidity. Always refer to the specific instructions provided with the resin and hardener.
How do I dispose of any unused hardener?
Dispose of any unused hardener and resin in accordance with local environmental regulations.
Can I use this hardener for projects other than flat roofs?
This hardener is primarily designed for flat roofing applications using Cure It resin and topcoat. Check product specifications for alternative uses.
Troubleshooting
Resin not hardening properly.
Check the mixing ratio. Ensure you've used the correct amount of hardener (1% to 2%) and that the product is within its expiration date. Check the temperature conditions and ensure they are within the acceptable range for winter grade hardener.
The mixture is too thick or difficult to apply.
Ensure the resin is at the correct temperature. Make sure the resin is properly mixed before applying.
Pros and Cons
Pros
- Ensures proper hardening of resin in cooler temperatures.
- Provides a durable and long-lasting finish for GRP roofs.
- Easy to mix with Cure It resin.
- Specifically designed for flat roofing applications.
- Enhances the longevity of your roofing project.
Cons
- Requires careful measurement and mixing.
- Only effective when used with Cure It resin.
- Performance is dependent on accurate temperature assessment.
Setup, Compatibility & Care
- Compatibility: Ensure the Cure It Winter Grade Hardener is used exclusively with Cure It resin and topcoat.
- Mixing: Always use a fibreglass resin catalyst dispenser to measure accurately. Mix the hardener with the resin at a 1% to 2% ratio, as recommended.
- Storage: Store the hardener in a cool, dry place, away from direct sunlight and heat sources.
- Safety: Wear appropriate protective gear, including gloves and eye protection, during mixing and application.
- Application: Apply the mixture in accordance with the manufacturer's instructions for the specific resin and topcoat being used.
- Disposal: Dispose of any unused hardener and resin in accordance with local environmental regulations.