ADATA Premier memory module - 16 GB 1 x 16 GB DDR4 3200 MHz
Not Available
Not Available
Currently unavailable
Currently out of stock
This product is not available at the moment. Check back later or explore other options below.
Product Information
Full details
This guide is for users looking to upgrade their desktop PC's memory with the ADATA Premier 16GB DDR4 3200MHz module. The key benefit is a significant boost in system responsiveness and multitasking capabilities. Note that this memory module is designed for desktops and requires compatibility with your motherboard's specifications. This guide provides comprehensive information on features, performance, setup, and troubleshooting to help you get the most out of your memory upgrade.
All features
| Series | Premier |
|---|---|
| Model Part Number | AD4U320016G22-SGN |
| Brand | ADATA |
Extended Product Information
FAQs
What is the CAS latency of this memory module?
The CAS latency is 22.
Can I use this memory with my laptop?
No, this is a desktop memory module (288-pin DIMM) and is not compatible with laptops.
Is this memory compatible with Intel and AMD systems?
Yes, it supports Intel Core 8th/9th/10th series and AMD Ryzen 2nd and 3rd generation processors.
What is the voltage of this memory module?
The voltage is 1.2V.
Does this memory module support ECC?
No, this module does not support ECC (Error-Correcting Code).
What is the speed of this memory?
The memory clock speed is 3200 MHz.
What is the capacity of this memory module?
The capacity is 16GB.
What is the warranty period?
This module comes with a lifetime warranty.
Troubleshooting
Computer doesn't boot after installing the memory.
Ensure the memory module is properly seated in the slot. Check the motherboard's manual for recommended slot configurations. Test the module in a different slot. Make sure the motherboard supports the memory speed.
System shows less RAM than expected.
Verify the memory is correctly detected in the BIOS. Check for any reported hardware issues. Run a memory diagnostic test using Windows Memory Diagnostic or a similar tool.
System is unstable or crashes.
Ensure the memory is compatible with the motherboard. Check for BIOS updates. Run a memory stress test using tools like Memtest86. If you're overclocking, try reducing the memory clock speed or voltage.
Computer beeps during startup.
Consult your motherboard manual to interpret the beep codes, which often indicate memory-related problems. Reseat the module, check for compatibility or consult the motherboard manual.
Pros and Cons
Pros
- Improved system responsiveness and multitasking capabilities.
- Lower power consumption, leading to reduced energy costs and heat generation.
- Wide compatibility with modern Intel and AMD platforms.
- Reliable performance with JEDEC standards compliance.
- Long-term reliability with a lifetime warranty.
Cons
- Requires a compatible motherboard with DDR4 support.
- May not provide a noticeable performance increase for users with already sufficient RAM.
- Limited to desktop systems; not compatible with laptops or other form factors.
- The 3200MHz clock speed might be slower compared to the latest DDR5 RAM.
Setup, Compatibility & Care
Installation
- Preparation: Turn off your computer and disconnect the power cord. Ground yourself to prevent electrostatic discharge.
- Open the Case: Open your computer case by removing the side panel.
- Locate Memory Slots: Identify the DDR4 memory slots on your motherboard. Refer to your motherboard manual to find the correct slots (usually labeled DIMM1, DIMM2, etc.) for dual-channel or quad-channel configurations.
- Insert the Module: Open the retaining clips on both ends of the memory slot. Align the notch on the memory module with the notch in the memory slot. Press down firmly on both ends of the module until the clips click into place.
- Close the Case: Close the computer case.
- Power On: Connect the power cord and turn on your computer.
- BIOS Setup: Enter the BIOS setup (usually by pressing Del, F2, or F12 during startup) and verify that the memory is recognized.
Compatibility
- Ensure your motherboard supports DDR4 memory. Check your motherboard's specifications.
- Confirm the clock speed is compatible. This module is 3200MHz, make sure your motherboard supports it.
- Ensure that you are using the correct form factor, which is 288-pin DIMM for desktop PCs.
Care
- Handle the memory module by its edges to avoid static discharge.
- Keep the memory module clean and free from dust.
- Avoid bending or applying excessive force to the module.
- Make sure your computer case has adequate airflow to keep the components cool.