Tiger Power Supplies TP1080 24V DC 3.75A 90W C14 2.1mm
Not Available
Not Available
Currently unavailable
Currently out of stock
This product is not available at the moment. Check back later or explore other options below.
Product Information
Full details
The Tiger Power Supplies TP1080 is a 90W desktop switch mode power supply designed for various applications requiring a stable 24V DC output. It offers built-in protection against over-voltage, short circuits, and over-current, ensuring device safety. A key benefit is its universal C14 input, allowing for easy connection with standard IEC power cords. However, it's important to note that the mains lead is sold separately and must be acquired before use.
All features
| Model Part Number | TP1080 |
|---|---|
| Brand | TIGER POWER SUPPLIES |
Extended Product Information
FAQs
What is the input connector type for the mains lead?
The power supply features a 3-pin C14 input, which is a standard IEC320 C14 connector. You will need a compatible IEC C13 mains power lead.
What is the size of the DC output connector?
The DC output connector is a female 2.1mm x 5.5mm x 12mm barrel connector, which is center positive.
Is the mains lead included with the power supply?
No, the mains lead is sold separately and must be purchased in addition to the power supply.
What is the maximum power output of the TP1080?
The Tiger Power Supplies TP1080 has a maximum power output of 90 Watts, with a maximum current of 3.75 Amps at 24V DC.
Does this power supply have over-voltage protection?
Yes, the TP1080 includes over-voltage, short circuit, and over-current protection features.
Can I use this power supply outdoors?
No, this power supply is designed for indoor use only. It should not be exposed to moisture or extreme environmental conditions.
What does 'Class I Design' mean?
Class I design refers to a basic level of electrical protection, typically relying on basic insulation and an earth connection for safety. It does not offer the enhanced protection of double or reinforced insulation.
Troubleshooting
No power output from the adapter.
Verify that the mains power lead is securely connected to both the power supply and the wall outlet. Check if the wall outlet is functional by testing it with another device. Ensure the DC connector is firmly plugged into the target device.
Device connected to the adapter is not working.
Confirm that the voltage (24V DC) and current (up to 3.75A) requirements of your device match the specifications of the TP1080. Check for proper DC connector polarity (center positive). Inspect the DC cable and connector for damage.
Overheating of the power adapter.
Ensure the power adapter is placed in a well-ventilated area and is not covered or obstructed. Avoid using the adapter in environments with high ambient temperatures. If overheating persists, discontinue use and contact support.
Pros and Cons
Pros
- Provides stable and reliable 24V DC power.
- Offers essential protection features for connected devices.
- Uses a common C14 input for easy power cord connection.
- Suitable for a wide array of electronic applications.
- Compact desktop form factor.
Cons
- Mains power lead is not included and must be purchased separately.
- The DC output connector size is specific and may require a matching cable.
- Class I design offers basic insulation, not double insulation.
Setup, Compatibility & Care
Setup:
- Ensure the power supply is switched off or unplugged.
- Connect a compatible IEC C13 mains power lead (sold separately) to the C14 input on the power supply.
- Connect the 2.1mm DC output plug to the corresponding DC input on your device. Ensure the polarity is correct (center positive).
- Plug the mains power lead into a suitable wall outlet.
- Power on your device.
Compatibility:
- Input: Requires a standard IEC C13 mains power lead.
- Output: Compatible with devices requiring 24V DC, up to 3.75A (90W), and that use a 2.1mm x 5.5mm x 12mm center-positive barrel connector.
- Environment: For indoor use only. Avoid exposure to moisture or extreme temperatures.
Care:
- Keep the power supply in a well-ventilated area to prevent overheating.
- Clean the exterior with a dry or slightly damp cloth. Do not use solvents or abrasive cleaners.
- Periodically check the DC output connector and cable for any signs of damage.