WAGO 770-618 - 5-Pole Distribution Connector
Not Available
Not Available
Currently unavailable
Currently out of stock
This product is not available at the moment. Check back later or explore other options below.
Product Information
Full details
The WAGO 770-618 is a professional-grade 5-pole distribution connector designed for robust building installations, maritime, railway, and industrial applications. Its key benefit lies in its pluggable 3-way distribution capability, allowing for efficient power distribution with a single input and three outputs, supporting wires up to 4mm² and a nominal current of 25A. A potential caveat is its IP20 rating, meaning it is not suitable for environments requiring high ingress protection.
All features
| Model Part Number | 770-618 |
|---|---|
| Brand | WAGO |
Extended Product Information
FAQs
What is the maximum wire size this connector can handle?
The WAGO 770-618 supports conductor cross-sections up to 4mm².
What does IP20 rating mean for this connector?
An IP20 rating means the connector is protected against solid objects larger than 12.5mm (like a finger) but offers no protection against water ingress. It is suitable for dry, indoor environments.
Can I use this connector for outdoor applications?
No, due to its IP20 rating, this connector is not designed for outdoor use or in environments exposed to moisture or dust without appropriate protective enclosures.
How many connections does each pole have?
Each pole features two conductor connections, allowing for loop-through connections or the use of jumpers.
What is the nominal current rating for this connector?
The nominal current rating for the WAGO 770-618 is 25A.
How do I ensure a secure connection?
The connector comes equipped with locking levers that must be engaged to ensure a secure connection. Ensure the plug and socket are fully inserted until the levers click into place.
Is this connector suitable for high-vibration environments?
Yes, the secure locking mechanism and robust construction make it suitable for applications like railway technology and industrial use where vibration is present.
Troubleshooting
Connector not making a connection
Ensure the male and female connectors are fully engaged. Check that the locking levers are properly secured. Verify that the wiring within the connector is correct and the conductors are stripped to the appropriate length.
Overheating during operation
Verify that the total current draw does not exceed the 25A rating. Ensure all wire connections are tight and that the correct wire cross-section is used. Inspect for any signs of damage or wear on the connector.
Loose connection or intermittent power
Re-seat the connector firmly. Check the locking levers to ensure they are fully engaged. Inspect the conductors for any damage and ensure they are securely held within the terminals.
Pros and Cons
Pros
- Simplifies wiring with integrated input/output design.
- High current rating (25A) suitable for various applications.
- Supports a wide range of wire sizes (up to 4mm²).
- Secure, pluggable connections with built-in locking levers.
- Designed for reliability in demanding professional settings.
- 100% protection against mismating ensures correct connections.
Cons
- IP20 rating offers limited protection against dust and moisture.
- Not suitable for exposed outdoor or wet environments without additional protection.
- Requires compatible WAGO connectors for full functionality.
- Fixed configuration (1x input, 3x output) may not suit all distribution needs.
Setup, Compatibility & Care
Setup: The WAGO 770-618 is designed for pluggable connections. Ensure the power source is de-energized before connecting. Insert the appropriate male plug into the female socket and vice versa. Push until the locking levers engage securely. Wire preparation should follow standard electrical practices for the specified conductor cross-section (up to 4mm²).
Compatibility: This connector is part of the WAGO 770 Series and utilizes the WINSTA MIDI interface. Ensure any mating connectors are compatible with the 5-pole configuration and Coding I specification. It is designed for building installations, maritime applications, and railway technology.
Care: The WAGO 770-618 requires minimal care due to its robust Polyamide construction. Keep the connector and its mating parts clean and free from debris. Ensure locking levers remain functional. For cleaning, use a dry or slightly damp cloth. Avoid harsh chemicals or solvents that could damage the material. Due to its IP20 rating, it should be installed in clean, dry environments or protected enclosures.