Laser Wheel Hub Holding Tool - 7090
Not Available
Currently unavailable
Currently out of stock
This product is not available at the moment. Check back later or explore other options below.
Product Information
Full details
This Laser Wheel Hub Holding Tool (7090) is designed for automotive technicians and DIY enthusiasts working on vehicles with various stud patterns. Its key benefit is providing a secure way to hold hubs and flanges during maintenance, preventing rotation and simplifying tasks like bearing service. A potential caveat is the need to account for its added length when using with a 1/2" drive power bar or torque wrench. The tool features a non-slip plastic-dipped handle and is engineered for use on wheel hubs, drive flanges, and gearbox/differential components.
All features
| Model Part Number | 7090 |
|---|---|
| Brand | Laser |
Extended Product Information
FAQs
What types of stud patterns does this tool support?
The tool is designed to work with vehicles that have 4 stud, 5 stud, 6 stud, and 8 stud patterns on their hubs and flanges.
Can this tool be used with a torque wrench?
Yes, the tool is compatible with a 1/2" drive power bar or torque wrench, allowing for precise torque application.
What specific automotive components can this tool be used on?
It is suitable for wheel hubs, drive flanges, gearbox output drive flanges, and differential input and output flanges. It can also hold rear differential yokes on solid axle vehicles.
How should I clean and maintain the tool?
Clean the tool after use with a cloth to remove dirt and grease. Store it in a dry environment to prevent rust. Regularly check the handle for any signs of wear or damage.
Is there anything I need to be aware of when using this tool with a torque wrench?
Yes, you must make allowance for the additional length the tool adds to the assembly when calculating leverage or measuring applied torque.
What if access to the hub or flange is limited?
The tool requires sufficient physical access to the studs. If clearance is severely restricted, it may not be possible to fit the tool securely. Always ensure a firm grip before applying force.
What is the main benefit of using this tool?
The primary benefit is its ability to securely hold hubs and flanges stationary, preventing rotation and making maintenance tasks like bearing service or fastener tightening safer and more efficient.
Troubleshooting
Tool does not fit securely on studs.
Ensure you are using the correct tool for the specific stud pattern. Check for any debris on the studs or tool openings that may be obstructing a proper fit.
Handle becomes slippery during use.
Wipe the handle dry and ensure your hands are clean. The non-slip coating is designed for grip, but excessive grease can reduce its effectiveness.
Difficulty preventing rotation of large components.
Ensure the tool is firmly seated on all applicable studs. For very stubborn components, consider using a breaker bar for initial loosening before switching to the hub holding tool.
Damage to tool or component during use.
Discontinue use immediately. Inspect the tool for damage. Ensure you are not exceeding the tool's intended operational limits and that you have accounted for the tool's length when applying torque.
Pros and Cons
Pros
- Wide compatibility with various stud patterns.
- Suitable for multiple automotive components (hubs, flanges, differentials).
- Ergonomic and non-slip handle for secure operation.
- Can be used with standard 1/2" drive tools for precise work.
- Simplifies tasks requiring a held flange or hub.
Cons
- Requires additional length consideration when using torque wrenches.
- Access may be limited on certain hub/flange designs.
- Not suitable for all types of fasteners or components outside its intended scope.
Setup, Compatibility & Care
Setup:
- Identify the stud pattern of the hub or flange you are working on (4, 5, 6, or 8 studs).
- Position the tool's arms around the studs, ensuring a snug fit.
- If using with a 1/2" drive power bar or torque wrench, attach it to the designated socket on the tool.
- Important: Remember to account for the additional length the tool adds when calculating leverage or measuring torque.
Compatibility:
- Designed for vehicles with 4, 5, 6, and 8 stud hub and flange patterns where physical access permits.
- Applicable to wheel hubs, drive flanges, gearbox output flanges, and differential input/output flanges.
- Suitable for solid axle vehicles when holding rear differential yokes.
Care:
- Clean the tool after each use with a dry or slightly damp cloth to remove grease and dirt.
- Store in a dry place to prevent rust.
- Inspect the non-slip handle for any damage before use.
- Avoid using excessive force or misusing the tool, as this may cause damage to the tool or the vehicle components.