SMS FLX01 FLEX Paint Additive 30ml
Not Available
Currently unavailable
Currently out of stock
This product is not available at the moment. Check back later or explore other options below.
Product Information
Full details
This guide is for hobbyists and modelers using SMS FLX01 FLEX Paint Additive. It helps improve paint performance and application on model kits. Keep in mind that results may vary depending on the paint type and application technique.
All features
| Model Part Number | SMSFLX01FLEXPaintAdditive30ml |
|---|---|
| Brand | SMS |
Extended Product Information
FAQs
What is the recommended ratio of additive to paint?
Refer to the paint manufacturer's instructions for the recommended ratio, or start with a small amount and adjust as needed.
Can I use this additive with any type of paint?
While the additive is compatible with many paints, it's best to test it first. Always follow the paint manufacturer's instructions.
How should I store the SMS FLX01 FLEX Paint Additive?
Store it in a cool, dry place, away from direct sunlight, and ensure the container is tightly sealed.
What kind of models is this additive suitable for?
It is suitable for Scalextric, Hornby, Radio Control, and other plastic model kits.
Will the additive change the color of my paint?
The additive is designed to be clear and shouldn't significantly alter the color. Always test on a small area first.
Is it safe to use?
Use in a well-ventilated area, and avoid contact with skin and eyes. Keep out of reach of children. Always follow the manufacturer’s safety guidelines for the paint.
Troubleshooting
Paint is cracking after drying.
Ensure the correct amount of additive was used and that the paint has dried completely. Consider testing the mixture on a different surface to confirm.
Paint isn't adhering well to the model.
Make sure the model surface is clean and properly prepared before painting. The additive may not be compatible with all paint types.
Paint is taking too long to dry.
Reduce the amount of additive used. Check the manufacturer's recommendations for drying times.
Pros and Cons
Pros
- Improves paint flexibility, reducing cracking and chipping.
- Enhances paint adhesion to plastic surfaces.
- Suitable for a wide range of model kits.
- Easy to incorporate into existing paint formulations.
- Provides a smoother paint finish.
- Offers increased durability.
Cons
- Results may vary depending on the paint type.
- Requires careful mixing to avoid issues.
- May alter the drying time of the paint.
- Not suitable for all types of paint.
- May require some experimentation to achieve optimal results.
- Additional cost to the paint system.
Setup, Compatibility & Care
- Compatibility: The SMS FLX01 FLEX Paint Additive is compatible with various paint types, but it's recommended to test it on a small, inconspicuous area first.
- Mixing: Mix the additive thoroughly with the paint before application. Refer to the paint manufacturer's instructions for the correct ratio.
- Application: Apply the paint as you normally would, using a brush, airbrush, or other suitable methods.
- Drying: Allow the paint to dry completely. Drying times may vary depending on the paint type and environmental conditions.
- Storage: Store the additive in a cool, dry place away from direct sunlight. Ensure the container is tightly sealed to prevent evaporation.
- Safety: Avoid contact with skin and eyes. Work in a well-ventilated area. Keep out of reach of children.