Wieland RST Classic Splitter Connector - 96.031.4353.1
Not Available
Currently unavailable
Currently out of stock
This product is not available at the moment. Check back later or explore other options below.
Product Information
Full details
The Wieland RST Classic Splitter Connector (96.031.4353.1) is designed for plug-in building installations, offering a robust and reliable solution for electrical connections. Its key benefit lies in its ease of use and high protection ratings, making it ideal for demanding environments. A potential caveat is its specific compatibility requirements for wire cross-sections. This 3-pole connector features a screw connection method for both solid and flexible wires, a contrast plug design with black coding, and pole marking for L, N, and PE. It provides IP66 and IP68 protection, ensuring safety and durability.
All features
| Model Part Number | 96.031.4353.1 |
|---|---|
| Brand | Wieland |
Extended Product Information
FAQs
What is the maximum current rating for this connector?
The Wieland RST Classic Splitter Connector has a maximum current rating of 20A.
What types of wires can be used with this connector?
This connector supports both solid and flexible wires with cross-sectional areas ranging from 0.75mm² to 6mm².
What does IP66/IP68 protection mean?
IP66 indicates protection against dust ingress and powerful water jets. IP68 indicates protection against prolonged immersion in water under specified pressure conditions, making it highly suitable for harsh environments.
How is the connection made to the wires?
The connection is made using a secure screw termination method within each terminal.
Is this connector suitable for outdoor use?
Yes, with its IP66 and IP68 ratings, it is designed to withstand harsh environmental conditions, including dust and water exposure, making it suitable for outdoor applications.
What is the pole configuration?
This is a 3-pole connector, designed for Line (L), Neutral (N), and Protective Earth (PE) connections.
Troubleshooting
No power at the output
Verify that the main power supply is on and correctly connected to the input side of the connector. Check that all wires are securely fastened in their respective screw terminals and that the correct poles (L, N, PE) are used. Ensure the mating connector is fully engaged.
Intermittent connection or power loss
Check for loose wire connections in the screw terminals. Ensure the wire stripping is correct and no stray strands are present. Inspect the contact surfaces for any contamination or damage. Ensure the connector is properly seated and locked.
Connector does not mate properly
Ensure you are using a compatible Wieland RST Classic connector. Check for any obstructions or damage to the mating faces of both connectors. Verify correct orientation; RST connectors are keyed to prevent incorrect insertion.
Pros and Cons
Pros
- Offers excellent protection against dust and water (IP66/IP68).
- Supports a wide range of wire sizes for flexibility.
- Easy and secure screw termination.
- Designed for straightforward plug-in installation in buildings.
- Clear pole marking (L, N, PE) aids in correct wiring.
Cons
- Specific compatibility needed for the 10-14mm² RST20I3 cable connector.
- Screw termination requires appropriate tools and attention to torque.
- Not suitable for applications requiring higher pole counts beyond 3.
Setup, Compatibility & Care Instructions
Setup:
- Ensure the power source is de-energized before installation.
- Strip the appropriate length of insulation from the solid or flexible wires according to the connection cross-section (0.75mm² to 6mm²).
- Insert the stripped wires into the designated screw terminals, ensuring correct L, N, and PE placement.
- Tighten the screw terminals securely, using a screwdriver appropriate for the terminal size. Refer to torque specifications if available.
- Connect the female RST20I3 cable connector (if applicable) to the appropriate cable cross-section (10-14mm²).
- Mate the connector with its corresponding counterpart, ensuring a secure click.
Compatibility:
This connector is designed to work with other Wieland RST Classic components. Ensure mating connectors and cables are rated for the same voltage and current. The RST20I3 cable connector part specifically mates with cables of 10-14mm² cross-sectional area.
Care:
- Regularly inspect the connector for any signs of damage, debris, or corrosion.
- Clean the exterior with a dry or slightly damp cloth. Avoid using harsh chemicals or solvents.
- Ensure strain relief is functioning correctly to prevent wire damage.