2M Car Battery Jump Leads Heavy Duty 100Amp Van Booster Cables Starter Clamps
Not Available
Currently unavailable
Currently out of stock
This product is not available at the moment. Check back later or explore other options below.
Product Information
Full details
The ROADSTER 100 Amp Jump Leads Set is designed for car, van, and small vehicle owners who need a reliable solution for jump-starting a vehicle with a dead battery. Its key benefit is providing efficient power transfer with heavy-duty clamps for a secure and safe connection, getting you back on the road quickly. A potential caveat is that the 100 Amp rating is best suited for smaller vehicles, not larger trucks or heavy-duty equipment. This product offers durable, tangle-resistant cables with copper cores and insulated grips for safe and effective use.
All features
| Model Part Number | 81184C |
|---|---|
| Brand | Roadster |
Extended Product Information
FAQs
What is the maximum vehicle size these jump leads are suitable for?
These 100 Amp jump leads are best suited for cars, vans, and small vehicles. They are not recommended for larger trucks or heavy-duty equipment.
How long are the cables?
The cables are approximately 2 meters (about 6.5 feet) in length.
Are the clamps insulated for safety?
Yes, the heavy-duty battery clamps feature fully insulated grips for improved safety during use.
What material are the cables made of?
The cables are made with high-quality copper wire for efficient power transfer and are coated with durable PVC for protection.
Can I use these jump leads if my battery is completely dead?
While they are designed for dead batteries, success depends on the condition of both batteries and the performance of the donor vehicle. A completely dead battery may require longer charging time from the donor vehicle, or professional assistance if it cannot hold a charge.
How should I store these jump leads?
The cables have a tangle-resistant design, making them easy to coil and store. It is recommended to store them in a clean, dry place, ideally in their original packaging or a dedicated storage bag, to prevent damage.
What should I do if I get a large spark when connecting?
A small spark upon final connection is normal. If you experience a large spark, immediately disconnect and re-check that you have connected the positive (+) to positive (+) and negative (-) to negative (-) terminals correctly, and the final ground connection is to an unpainted metal surface away from the battery.
Troubleshooting
Vehicle does not start after connecting jump leads.
Ensure the red clamps are securely attached to the positive terminals and the black clamps are securely attached to the negative terminals (or chassis ground). Verify the donor vehicle's engine is running and has been for a few minutes. Check that the jump leads are not touching any moving parts of the engine.
Sparks when connecting clamps.
A small spark may occur when connecting the final black clamp to the grounded chassis. This is normal. However, avoid connecting the clamps directly to each other or to the wrong terminals, as this can cause a larger spark or damage.
Jump leads feel hot during use.
This can indicate excessive current draw, a poor connection, or a severely depleted battery. Disconnect immediately and check all connections. Ensure the cables are not overly strained or kinked. If the issue persists, the battery may be faulty or require professional attention.
Pros and Cons
Pros
- Efficient power transfer due to copper core wiring.
- Secure and safe connections with heavy-duty, insulated clamps.
- Flexible and tangle-resistant cables for ease of use and storage.
- Durable construction with PVC coating for longevity.
- Suitable for a wide range of smaller vehicles.
Cons
- 100 Amp rating may be insufficient for larger engines or heavy-duty vehicles.
- Requires another working vehicle to provide a jump start.
- Proper use requires caution to avoid damage or injury.
- Cable length might be restrictive for certain parking situations.
Setup, Compatibility & Care
Setup and Use:
- Ensure both vehicles are turned off and parked close enough for the cables to reach.
- Attach the red clamp to the positive (+) terminal of the dead battery.
- Attach the other red clamp to the positive (+) terminal of the donor battery.
- Attach the black clamp to the negative (-) terminal of the donor battery.
- Attach the final black clamp to an unpainted metal surface on the engine block or chassis of the dead vehicle, away from the battery.
- Start the donor vehicle and let it run for a few minutes.
- Attempt to start the dead vehicle.
- Once the dead vehicle has started, carefully disconnect the cables in reverse order: black from the chassis, black from the donor battery, red from the donor battery, and finally red from the vehicle that was jumped.
Compatibility:
These jump leads are compatible with most cars, vans, and small vehicles. They are not recommended for heavy-duty trucks, agricultural machinery, or large industrial engines that require higher amperage.
Care:
- After each use, wipe the clamps clean and ensure the cables are free of dirt or debris.
- Store the cables in their original packaging or a designated bag to prevent tangling and damage.
- Inspect the cables and clamps regularly for any signs of wear, cracks, or damage. Discontinue use if damage is found.