Nextbase OBD Hardwire Kit - NBDVRS2OBD
Not Available
Not Available
Currently unavailable
Currently out of stock
This product is not available at the moment. Check back later or explore other options below.
Product Information
Full details
The Nextbase Series 2 OBD Hardwire Kit is designed for Nextbase Series 2 dash cam owners who want a clean, permanent power solution without needing to access the fuse box. Its key benefit is providing continuous power directly from your vehicle's OBD-II port, enabling your dash cam's Smart Parking mode seamlessly and freeing up your 12V outlet. A minor caveat is that it utilizes your vehicle's OBD-II port, which might be needed for other diagnostic tools or devices.
All features
| Model Part Number | NBDVRS2OBD |
|---|---|
| Brand | Nextbase |
Extended Product Information
FAQs
Which Nextbase Dash Cams are compatible with this OBD Hardwire Kit?
This OBD Hardwire Kit is specifically designed for use with Nextbase Series 2 Dash Cams (e.g., 222, 322GW, 422GW, 522GW, 622GW).
Does this kit drain my car battery?
The kit is designed with a low power draw to minimize battery drain. However, like any device connected to your car's battery, leaving it connected indefinitely on a vehicle that isn't driven for very long periods could theoretically drain a very weak battery. Modern vehicles and the kit typically have safeguards against excessive drain.
Where is my vehicle's OBD-II port located?
The OBD-II port is usually located on the driver's side, often under the dashboard or near the steering column. Refer to your vehicle's owner's manual for its exact location.
Can I use this kit with other dash cam brands?
No, this kit is specifically engineered for compatibility and optimal performance with Nextbase Series 2 Dash Cams only due to unique power requirements and connector types.
Do I need professional installation for this kit?
No, the Nextbase Series 2 OBD Hardwire Kit is designed for a simple plug & play installation, making it suitable for DIY setup without professional help.
Will this kit interfere with other OBD-II devices or diagnostics?
While it occupies the OBD-II port, the 90° design often allows for other devices to be temporarily plugged in alongside or after unplugging the dash cam from the kit for diagnostics. It generally does not interfere with the vehicle's ECU or other systems.
How do I know if the kit is providing power?
The kit features a built-in LED indicator light. If the LED is illuminated, it confirms that the kit is connected and providing power to your dash cam.
Troubleshooting
Dash cam not powering on after connecting the OBD Hardwire Kit.
Ensure the kit's 90° connector is fully inserted into the vehicle's OBD-II port. Check that the dash cam is properly connected to the kit. Verify the LED indicator light on the hardwire kit is illuminated, indicating power. If not, try plugging the dash cam into a standard 12V outlet to confirm the dash cam itself is functioning.
Smart Parking Mode is not activating or working correctly.
Confirm that your Nextbase Series 2 dash cam has Smart Parking Mode enabled in its settings. Ensure the OBD Hardwire Kit is providing a permanent live connection (LED indicator should be on even when the vehicle is off). If the vehicle battery is very low, some dash cams may disable parking mode to conserve power.
The LED indicator light on the kit is not on.
Double-check the connection to the vehicle's OBD-II port. Ensure the vehicle's ignition is off (the kit is designed to provide power when the vehicle is off, but some OBD-II ports may not provide constant power if the vehicle's battery is completely dead or has a fault). Ensure the kit is fully seated.
Cable seems loose or easily disconnects from the OBD-II port.
Ensure the 90° connector is pushed in firmly until it clicks or feels secure. If the port itself is loose, it might be a vehicle issue. Route the cable with minimal tension to prevent pulling on the connector.
Pros and Cons
Pros
- Effortless Installation: No need for fuse box knowledge or complex wiring.
- Permanent Power Supply: Ensures continuous operation and support for parking modes.
- Clean Interior Look: Wires are neatly tucked away, avoiding visible cables from the 12V socket.
- Frees 12V Socket: Allows other devices to be powered or charged.
- Designed for Nextbase Compatibility: Optimized for seamless integration with Nextbase Series 2 dash cams.
Cons
- OBD-II Port Usage: Occupies the vehicle's OBD-II port, which might be used for other vehicle diagnostics.
- Specific Compatibility: Only compatible with Nextbase Series 2 dash cameras.
- Continuous Power Draw: While minimal, it draws power even when the vehicle is off, which could eventually affect a very weak battery over extended periods of inactivity.
Setup, Compatibility & Care
Setup Instructions
- Locate Your OBD-II Port: Your vehicle's OBD-II port is typically located under the dashboard on the driver's side, often near the steering column. Consult your vehicle's manual if you have difficulty locating it.
- Plug in the Kit: Carefully plug the 90° connector end of the Nextbase OBD Hardwire Kit into your vehicle's OBD-II port. Ensure it is firmly seated.
- Route the Cable: Neatly route the cable from the OBD-II port to your dash cam's mounting location. Use trim tools or cable clips to tuck the cable along the vehicle's pillars or dashboard edges for a clean installation.
- Connect to Dash Cam: Plug the other end of the hardwire kit into the power input port on your Nextbase Series 2 Dash Cam.
- Verify Power: Once connected, the LED indicator light on the hardwire kit should illuminate, confirming the dash cam is receiving power.
Compatibility
- Dash Cam Compatibility: Specifically designed for Nextbase Series 2 Dash Cams.
- Vehicle Compatibility: Compatible with all vehicles equipped with a standard OBD-II port (generally vehicles manufactured in 1996 or newer).
Care and Maintenance
- Secure Connections: Periodically check that both the OBD-II port connection and the dash cam connection are secure to prevent accidental disconnection.
- Cable Routing: Ensure the cable is not pinched or exposed to excessive heat or sharp edges, which could damage the wiring.
- Cleanliness: Keep the connectors free from dust and debris to ensure optimal electrical contact. Use a dry, soft cloth for cleaning if necessary.
- Temperature: While designed for automotive environments, avoid exposing the kit to extreme temperatures outside of normal operating conditions to prolong its lifespan.