Sylvania Starter - FS-22
Not Available
Currently unavailable
Currently out of stock
This product is not available at the moment. Check back later or explore other options below.
Product Information
Full details
This guide is for users of electric fly killer units who need replacement starters. The Sylvania FS-22 Universal Starters offer reliable ignition for 2 or 4 lamp bulb units, compatible with 16w, 30w, and 36w bulbs. A key benefit is their universal compatibility across many electric fly killer models. However, they are sold in pairs, so purchasing a single unit is not possible.
All features
| Model Part Number | FS-22 |
|---|---|
| Brand | Sylvania |
Extended Product Information
FAQs
What type of electric fly killer units are these starters compatible with?
These Sylvania FS-22 starters are compatible with electric fly killer units that use 2 or 4 lamp bulbs and are designed to accept a starter for ignition.
What bulb wattages can these starters be used with?
They are suitable for fluorescent bulbs rated at 16w, 30w, and 36w.
Do I need to replace both starters if only one bulb is out?
It is generally recommended to replace both starters when one fails, as the other starter is likely nearing the end of its lifespan and may fail soon after. This ensures optimal performance of the unit.
How do I know if my fly killer uses a starter?
Most older or simpler electric fly killer models utilize starters. If your unit has small, cylindrical components with two pins located near the fluorescent bulb holders, it likely uses starters. Newer or more advanced models might use integrated electronic ballasts that do not require separate starters.
Can I use these starters with LED bulbs?
No, these starters are specifically designed for fluorescent bulbs and are not compatible with LED replacements. Using them with LED bulbs will not work and could potentially damage the components.
What is the shelf life of these starters?
Under normal storage conditions (cool, dry place away from direct sunlight), fluorescent starters generally have a long shelf life, often several years. However, actual lifespan can vary.
Troubleshooting
Fly killer unit's bulbs do not light up after replacing starters.
Ensure the unit is plugged in. Check that the new starters are fully seated in their sockets and twisted to lock. Verify that the fluorescent bulbs themselves are functioning and properly seated. If the issue persists, the fly killer's ballast or internal wiring may need inspection.
One bulb lights up, but the other does not.
This usually indicates a faulty starter or bulb on the side that is not lighting. Try swapping the new starters to see if the problem follows the starter. If it does, the starter is likely bad. If the problem remains with the original bulb side, try replacing that bulb as well.
Bulbs flicker intermittently.
Intermittent flickering can be caused by a failing starter, a loose bulb connection, or a worn-out fluorescent bulb. Ensure the bulbs are securely in place and try replacing the starters. If flickering continues, the bulbs may need replacement.
Pros and Cons
Pros
- Broad compatibility with common electric fly killer configurations.
- Supports a range of popular fluorescent bulb wattages.
- Reliable performance from a trusted manufacturer.
- Comes in a convenient pack of two for immediate replacement or spares.
Cons
- Must be purchased in pairs, not available as a single unit.
- Specific compatibility may vary with older or non-standard fly killer models.
- Requires manual installation, not a plug-and-play solution without opening the unit.
Setup, Compatibility & Care
Compatibility Check:
Before installation, verify that your electric fly killer unit is designed for starters and uses 2 or 4 lamp bulbs. Confirm that the fluorescent bulbs are within the 16w, 30w, or 36w range. These starters are typically found in older or simpler electric fly killer designs.
Setup/Installation:
*Ensure the electric fly killer unit is unplugged from the power source before attempting any maintenance.*
- Access the starter location within your electric fly killer unit. This usually involves removing a cover or panel.
- Identify the existing starter(s). They are typically small, cylindrical components with two prongs or connections.
- Twist and pull the old starter to remove it. Note its orientation if it has specific connection points.
- Insert the new Sylvania FS-22 starter into the socket, aligning the prongs correctly.
- Twist to secure the starter in place.
- Reassemble any removed panels or covers.
- Plug the unit back in and test the operation.
Care:
Starters are generally maintenance-free components. However, keeping the electric fly killer unit clean from dead insects and dust can help prevent issues that might indirectly affect starter performance or longevity. Regularly check that the bulbs are securely seated in their holders.