iDye Poly Fabric Dye - Orange
Not Available
Not Available
Currently unavailable
Currently out of stock
This product is not available at the moment. Check back later or explore other options below.
Product Information
Full details
iDye Poly Orange is designed for crafters and artists who need to color synthetic materials like polyester, nylon, and plastics. Its primary benefit is providing vibrant, consistent color to materials that standard fabric dyes cannot. A key consideration is that it works best on 100% synthetic materials; for blends, a different approach is needed. This dye features a unique, mess-free dissolvable packet, making the dyeing process straightforward and clean. It's trusted worldwide for its effectiveness on a wide range of synthetic items, from cosplay fabrics to 3D printed objects.
All features
| Model Part Number | iDye Poly |
|---|---|
| Brand | Jacquard |
Extended Product Information
FAQs
Can I use iDye Poly on cotton or natural fabrics?
No, iDye Poly is specifically designed for synthetic fibers like polyester and nylon. For natural fibers such as cotton, linen, or rayon, you should use iDye for Natural Fabrics.
How do I dye a fabric blend containing both synthetic and natural fibers?
You can achieve this by using iDye Poly and iDye for Natural Fabrics in the same dye bath at the same time. Ensure you use corresponding colors for the most consistent results, or experiment with different colors for unique effects.
What temperature should the water be?
The dye bath should be brought to a simmer, which is typically around 180-200°F (82-93°C). This heat is crucial for the dye to properly bond with synthetic fibers.
Can I use iDye Poly on plastics?
Yes, iDye Poly is effective on many types of plastics, including those used in toys, buttons, 3D printed objects, and more. Results may vary depending on the specific type of plastic.
How much dye packet should I use?
Each iDye packet is pre-measured for a specific amount of fabric (typically up to 1 lb or 0.45 kg). Use one packet per pound of material for best results. The packet dissolves completely in the water.
Can I use this dye in a washing machine?
While iDye Poly is designed for stovetop simmering, some users have success using it in a high-efficiency washing machine on the hottest cycle available. However, stovetop simmering generally yields more consistent and vibrant results, especially for synthetics.
How long does the color last?
When applied correctly and cared for properly, the color is permanent and should last for the life of the item. Proper rinsing and washing procedures are important for color longevity.
Troubleshooting
Color is too light or uneven.
Ensure the material is 100% synthetic. Check that the dye bath reached and maintained simmering temperature. Stir the item continuously for even dyeing. For deeper shades, increase dye time or use more dye. Ensure the item was thoroughly washed before dyeing.
Dye did not adhere to the material.
Verify the material composition. iDye Poly only works on synthetics. If the material is a blend, the natural fibers will not dye. Ensure the material was not treated with a water-repellent finish that could prevent dye absorption.
The dissolvable packet did not fully dissolve.
Ensure the water was sufficiently hot when the packet was added. Stirring vigorously helps the packet dissolve completely. If small remnants remain, they are generally harmless but should be stirred to disperse.
Color bleeds after rinsing.
Rinse the item thoroughly in cool water until the water runs clear. Wash the dyed item separately from other laundry for the first few washes using a mild detergent. Ensure the simmering time was adequate; sometimes longer dyeing times can help set the color more permanently.
Pros and Cons
Pros
- Effectively dyes 100% polyester and nylon.
- No-mess, pre-measured dissolvable packets.
- Works on a wide variety of synthetic materials beyond fabric.
- Suitable for cosplay and prop creation.
- Can be combined with iDye for Natural Fabrics for blends.
Cons
- Does not dye natural fibers like cotton or linen.
- Requires simmering temperature for best results.
- May require multiple applications for very dark or saturated colors.
- Color results can vary based on the specific synthetic material.
Setup, Compatibility & Care Instructions
Setup:
- Fill a pot (stainless steel or enamel is recommended) with hot water. The amount of water depends on the size of the item being dyed; ensure it can move freely.
- Drop the entire iDye Poly packet into the water. Stir until the packet dissolves completely.
- Add your thoroughly washed synthetic item (100% polyester, nylon, or compatible plastic). Ensure the item is fully submerged.
- Bring the dye bath to a simmer (around 180-200°F or 82-93°C). Maintain this temperature for the duration of the dyeing process.
- Stir the item gently and constantly for optimal, even color penetration. Dyeing times typically range from 30 minutes to 1 hour, but can be extended for deeper shades.
- Once the desired color is achieved, remove the item from the dye bath.
- Rinse the item in cool water until the water runs clear. Wash separately with mild detergent and tumble dry or hang dry.
Compatibility:
- Ideal For: 100% Polyester, 100% Nylon, acrylics, and most plastics (e.g., ABS, PLA, some vinyls). Also effective on items like buttons, frisbees, plastic toys, wigs, and urethane coatings.
- For Blends: Can be used in conjunction with iDye for Natural Fabrics (in a corresponding color) for fabrics containing both synthetic and natural fibers.
- Not For: 100% Cotton, linen, rayon, silk, or wool. These require a different dye type.
Care:
- Always wash newly dyed items separately for the first few washes to prevent color bleeding.
- Use mild detergents.
- Avoid harsh bleach or strong cleaning agents, which can fade the color.