Loctite All Plastics Glue 2G + Activator Pen (4 Pack) - White
Not Available
Currently unavailable
Currently out of stock
This product is not available at the moment. Check back later or explore other options below.
Product Information
Full details
This guide is for DIY enthusiasts and homeowners who need to repair difficult-to-bond plastics and mixed materials. The key benefit is its powerful dual-action system that creates reliable, long-lasting bonds on challenging surfaces like PE, PP, and PTFE. A potential caveat is that it's a two-part system, requiring careful application of both glue and activator. This Loctite All Plastics Glue features a fast-setting, clear-drying formula with an activator pen that prepares surfaces for superior adhesion, making it ideal for a variety of household and workshop repairs.
All features
| Colour | White |
|---|---|
| Brand | Loctite |
Extended Product Information
FAQs
What types of plastic can this glue bond?
This glue is specifically designed for difficult plastics including PE (Polyethylene), PP (Polypropylene), and PTFE. It also bonds well with many other plastics like ABS and PVC.
How long does the glue take to set?
The fast-acting formula bonds in seconds, with a full cure typically achieved within 24 hours for maximum strength.
Do I need to clamp the parts after applying the glue?
Minimal clamping is usually required as the bond forms rapidly. Holding the parts together firmly for at least 30 seconds is sufficient for the initial bond.
Is the bond waterproof and resistant to chemicals?
Yes, the cured bond provides resistance to water, chemicals, and low temperatures, making it suitable for various environmental conditions.
What is the purpose of the activator pen?
The activator pen prepares low-energy plastic surfaces, improving adhesion and ensuring a stronger, more reliable bond on plastics that are typically hard to glue.
Can I use this glue on painted surfaces?
It is not recommended for use on painted surfaces as the chemicals in the glue or activator may damage the paint.
How should I store the unused kits?
Store the kits in a cool, dry place, away from direct sunlight and heat. Ensure the glue tube and activator pen caps are tightly sealed after each use.
What is the shelf life of Loctite All Plastics Glue?
When stored correctly, the glue typically has a shelf life of about two years. The activator pen may dry out sooner if not sealed properly.
Troubleshooting
Glue not bonding quickly
Ensure the activator was applied and allowed to dry completely on one surface before applying glue to the other. Verify that the plastic is indeed compatible (PE, PP, PTFE, etc.).
Activator pen not dispensing liquid
Check if the pen tip is clogged. Gently try to clear it or ensure the cap was properly sealed to prevent drying.
Bond is weak or brittle
Ensure surfaces were thoroughly cleaned and dry before application. Excessive glue or insufficient clamping time can also lead to weak bonds. Reapply if necessary, ensuring proper preparation and technique.
Skin bonding
Do not pull bonded skin apart. Soak the bonded area in warm, soapy water and gently try to peel or roll the skin apart. For large areas or eye contact, seek medical attention immediately.
Glue or activator has dried out
If the glue tube is hardened or the activator pen is dry, the product is no longer usable and should be replaced. Ensure caps are always sealed tightly after use.
Pros and Cons
Pros
- Effectively bonds notoriously difficult plastics (PE, PP, PTFE).
- Fast-acting formula saves time on repairs.
- Clear drying provides aesthetically pleasing results.
- Resistant to water, chemicals, and cold for durable repairs.
- Dual-part system offers superior adhesion compared to single adhesives.
- Convenient kit format with glue and activator.
Cons
- Requires careful application of both glue and activator.
- May not be suitable for very large or structural repairs due to small tube size.
- Cyanoacrylate glues can bond skin instantly; requires careful handling.
- Activator pen can dry out if not capped properly.
- Limited open time once both components are applied.
Setup, Compatibility & Care
Setup:
- Ensure both surfaces to be bonded are clean, dry, and free from dust or grease.
- Apply the activator pen evenly to *one* of the surfaces you intend to bond. Allow it to dry completely for 10-30 seconds.
- Apply a small amount of the cyanoacrylate glue to the *other* surface.
- Immediately press the two surfaces together firmly and hold for at least 30 seconds to allow the initial bond to form.
- For optimal strength, allow the bond to cure fully for at least 24 hours.
Compatibility:
- Excellent for: Polyethylene (PE), Polypropylene (PP), PTFE, ABS, PVC, acrylic, metal, rubber, wood, leather, ceramics.
- Not recommended for: Glass, Styrofoam, painted surfaces, or fabrics.
Care:
- Store kits in a cool, dry place away from direct sunlight.
- Ensure the activator pen cap is tightly sealed after each use to prevent drying out.
- Store the glue tube with its cap securely fastened.
- Keep out of reach of children and pets.
- Wear gloves during application to avoid skin bonding.