Shape Sony FS5 Viewfinder Solution
Not Available
Currently unavailable
Currently out of stock
This product is not available at the moment. Check back later or explore other options below.
Product Information
Full details
The Shape Sony FS5 Viewfinder Solution is a specialized mounting kit designed for videographers and cinematographers using Sony FS5, FS5M2, or PXW-FS5M2 cameras who need more flexible LCD screen positioning. By utilizing the 15mm Lightweight Support (LW) system, this kit enables operators to adjust their monitor distance for improved ergonomics during handheld or tripod shooting; however, it requires the Shape FS5 Top Plate for initial installation.
All features
| Brand | Shape |
|---|
Extended Product Information
FAQs
Does this kit include the top plate?
No, the Shape FS5 Top Plate is required for installation but is sold separately.
Can I use standard 15mm rods from other brands?
Yes, as long as they follow the industry-standard 15mm dimension, other brand rods will fit the clamps.
Is this suitable for a Sony FS7?
No, this specific kit is designed exclusively for the Sony FS5, FS5M2, and PXW-FS5M2 series.
How much weight can the 8-inch rods support?
While the system is designed to be lightweight, it is intended for standard camera accessories like monitors and mics; avoid mounting heavy, long-lens follow focus setups that exceed standard LW rig capacities.
Will this block the camera's air vents?
No, the design is positioned to attach to the top plate without obstructing the camera's cooling or ventilation systems.
Troubleshooting
LCD screen is sliding on the rods
Ensure the tension knobs on the screen mount adapter are tightened securely; if it continues to slip, check that the rods are clean and free of oil or lubricant.
Mounting brackets feel loose on the top plate
Verify that all mounting screws connecting the rod clamps to the Shape FS5 Top Plate are fully tightened using an appropriate hex key.
LCD screen angle is fixed
The adapter allows for distance adjustment; ensure the LCD's native hinge is unlocked to allow for additional tilt and pan adjustments while the mount provides the depth positioning.
Pros and Cons
Pros
- Significantly enhances LCD monitor adjustability
- Lightweight build suitable for gimbals and drones
- Uses standard 15mm rods for high accessory compatibility
- Sturdy construction ensures the monitor remains in the desired position
- Maintains optical center alignment
Cons
- Requires the Shape FS5 Top Plate for mounting
- Adds a small amount of height to the top of the camera
- Limited to 15mm rod accessories
Setup, Compatibility & Care
To set up the FS5VF, first ensure you have the Shape FS5 Top Plate installed on your camera. Secure the two rod clamps onto the top plate, then slide the 8-inch 15mm rods through the clamps. Attach the screen mount adapter to the rods, then fasten your Sony LCD screen to the adapter. Tighten all knobs to ensure no slippage during operation.
Regarding compatibility, this unit is specifically designed for the Sony FS5, FS5M2, and PXW-FS5M2. Keep the rods clean and free of debris to ensure smooth sliding of the mount adapter. If the system is used in salty or dusty environments, wipe the rods down with a dry, lint-free cloth after the shoot to prevent oxidation and ensure the clamp tension remains consistent over time.