Orac Decor W111 - 3D Wall Panel
Not Available
Not Available
Currently unavailable
Currently out of stock
This product is not available at the moment. Check back later or explore other options below.
Product Information
Full details
The Orac Decor W111 is designed for homeowners and interior designers looking to add a modern architectural element to their spaces. Its key benefit is transforming flat walls into dynamic, textured surfaces with minimal effort. A potential caveat is that while lightweight, precise cutting may require specific tools for intricate designs. This 3D wall panel offers a unique way to create focal points, featuring a durable Purotouch polyurethane construction for longevity and ease of installation.
All features
| Model Part Number | W111 |
|---|---|
| Brand | Orac |
Extended Product Information
FAQs
What material is the Orac Decor W111 panel made from?
The panel is crafted from Purotouch polyurethane, a durable and lightweight material.
How are the panels installed?
Panels are installed using a strong, suitable wall panel adhesive. Surface preparation is key for optimal adhesion.
Can I paint the W111 wall panel?
Yes, the panel is designed to be painted any color to match your decor. It's recommended to prime it first for best results.
What are the dimensions of one panel?
Each panel measures 200cm in length, 25cm in height, and 2cm in width.
Can the W111 be combined with other Orac Decor products?
Yes, it can be seamlessly combined with other Orac Decor profiles such as CX190 and SX194 for more extensive design possibilities.
Is this product suitable for bathrooms or kitchens?
The Purotouch material is resistant to moisture, making it suitable for most indoor environments. However, avoid direct, prolonged exposure to high humidity or water splashes. Ensure proper ventilation in such areas.
What tools are needed for installation?
Basic tools include a measuring tape, level, a fine-toothed saw or profile cutter for accurate cuts, a caulking gun for adhesive, and potentially painter's tape.
Troubleshooting
Panels not adhering properly
Ensure the wall surface is thoroughly cleaned, dry, and free of dust or grease. Verify that the correct adhesive is used and applied according to manufacturer instructions. Allow adequate drying time for the adhesive.
Gaps between panels or at edges
Carefully re-measure and re-cut panels for a precise fit. Use a suitable filler or caulk to fill small gaps after installation and before painting.
Cutting results in chipped edges
Use a sharp, fine-toothed saw or a specialized profile cutter. Ensure the panel is securely supported during cutting to prevent splintering.
Paint finish is uneven
Apply a coat of primer before painting for a uniform base. Use a high-quality paint and apply thin, even coats. Ensure the surface is clean and smooth before painting.
Pros and Cons
Pros
- Adds significant visual depth and modern texture to walls.
- Durable and lightweight Purotouch material ensures longevity and ease of handling.
- Simple adhesive installation makes it suitable for DIY projects.
- Paintable surface offers complete customization to match any interior design.
- Can be integrated with other profiles for expansive and complex designs.
Cons
- Requires precise cutting for custom fits, which might need specialized tools.
- Adhesive application requires careful surface preparation for optimal adhesion.
- May not be suitable for heavily textured or uneven existing walls without preparation.
- The 2cm depth, while adding dimension, might be limiting for extremely dramatic effects.
- Initial cost might be higher than traditional wallpaper or paint.
Setup, Compatibility & Care
Setup:
- Surface Preparation: Ensure the wall surface is clean, dry, and free from dust or grease. Minor imperfections should be smoothed.
- Cutting: Measure and cut panels to size using a fine-toothed saw or a specialized profile cutter for clean edges.
- Adhesive Application: Apply a strong, suitable wall panel adhesive (e.g., F-prime or Decofix) evenly to the back of the panel or directly onto the wall following adhesive instructions.
- Installation: Firmly press the panel onto the wall, ensuring good contact. Use painter's tape to hold panels in place while the adhesive cures if necessary.
- Finishing: Once adhesive is dry, fill any small gaps with a suitable filler and sand smooth. Apply primer and then your chosen paint color.
Compatibility:
- The W111 panel is designed to integrate seamlessly with Orac Decor profiles CX190 and SX194 for more elaborate designs.
- Suitable for most indoor wall surfaces, including drywall, plaster, and painted surfaces.
Care:
- Clean gently with a damp cloth and mild soap if needed. Avoid abrasive cleaners.
- The Purotouch material is resistant to moisture but should not be submerged or exposed to excessive humidity.