Evo-Stik Waterproof Wall Tile Adhesive - 10L - White
Not Available
Not Available
Not Available
Currently unavailable
Currently out of stock
This product is not available at the moment. Check back later or explore other options below.
Product Information
Full details
This guide is for DIY enthusiasts and professionals seeking a reliable, ready-mixed adhesive for tiling in areas with occasional moisture, like kitchens and bathrooms. The Evo-Stik Waterproof Wall Tile Adhesive offers a waterproof, mould-resistant solution for fixing ceramic tiles to various interior surfaces. Keep in mind that while it's suitable for shower areas, it is not designed for surfaces with continuous water exposure.
All features
| Colour | White |
|---|---|
| Model Part Number | 30812633 |
| Brand | Evo-Stik |
Extended Product Information
FAQs
What surfaces can I use this adhesive on?
You can use this adhesive on most interior surfaces, including plaster, plasterboard, glazed tiles, brick, and cement.
Is this adhesive suitable for shower floors?
No, this adhesive is not recommended for shower floors or areas with continuous water exposure.
How long does it take for the adhesive to dry?
Allow at least 24 hours for the adhesive to dry before grouting.
Can I apply this adhesive over existing tiles?
Yes, this adhesive can be applied directly over existing tiles, provided the surface is clean and sound.
How much area does a 10L bucket cover?
Coverage is approximately 1.2 m² per litre with a notched trowel or 0.3 m² per litre for a solid bed.
What is the shelf life of this adhesive?
Please refer to the product packaging for the specific shelf life information.
What type of tiles can I use with this adhesive?
This adhesive is suitable for fixing ceramic wall tiles.
Troubleshooting
Tiles are not adhering properly.
Ensure the surface is clean, dry, and free from debris. Use the correct notch size trowel and apply the adhesive evenly. Make sure to press tiles firmly into place.
Adhesive is taking too long to dry.
Ensure proper ventilation and check the room temperature and humidity levels. Allow sufficient drying time before grouting.
Mould is growing on the adhesive.
Clean the affected area with a mould remover. Ensure the area is well-ventilated and reduce moisture to prevent further growth.
Pros and Cons
Pros
- Ready to use, saving time and effort.
- Waterproof and mould-resistant formula.
- Suitable for a wide range of interior surfaces.
- Can be applied directly onto existing tiles.
- Extended open time for easier application.
Cons
- Not suitable for areas with continuous water exposure.
- Coverage varies depending on the trowel used.
- Off-white colour may not suit all tile colours.
Setup, Compatibility & Care
Setup
- Surface Preparation: Ensure the surface is clean, dry, and free from loose debris. If necessary, sand or clean the surface to improve adhesion.
- Application: Apply the adhesive using a notched trowel, maintaining a consistent depth. Follow the manufacturer's instructions for the specific trowel notch size.
- Tile Placement: Firmly press the tiles into the adhesive, ensuring good contact. Use tile spacers to maintain even grout lines.
- Drying: Allow the adhesive to dry for at least 24 hours before grouting.
Compatibility
- Suitable Surfaces: Plaster, plasterboard, glazed tiles, brick, cement, cement renders, and tile backer boards.
- Suitable Tiles: Ceramic wall tiles.
Care
- Clean up any adhesive spills or splashes immediately with a damp cloth.
- Once the adhesive is dry, clean the tiled surface with a mild detergent and water.