One Part Adhesive For AM Clad Cladding - 12.5kg
Not Available
Currently unavailable
Currently out of stock
This product is not available at the moment. Check back later or explore other options below.
Product Information
Full details
This one-part adhesive by AM Clad is designed for professional installers and contractors looking for a reliable solution for antimicrobial and hygiene cladding projects. The primary benefit is its high-strength, waterproof bonding capability that works on both dry and damp substrates, though users should note that the 12.5kg container size makes it best suited for medium to large-scale installations rather than minor patch jobs.
All features
| Model Part Number | AMOPA |
|---|---|
| Brand | AM Clad |
Extended Product Information
FAQs
Can this be used in a commercial kitchen?
Yes, it is specifically formulated for hygiene-critical environments, including kitchens and food preparation areas.
Is it suitable for outdoor use?
No, this adhesive is intended for internal cladding installations.
Can I apply this directly to brickwork?
It is intended for use on stable, flat substrates; check that the brickwork is sound and free of loose materials before applying.
How long does it take to cure?
Cure times vary based on ambient temperature and humidity; check the technical data sheet for specific environmental drying times.
Does it need to be mixed with anything?
No, this is a convenient one-part formula, ready to use straight from the 12.5kg tub.
Troubleshooting
Adhesive is difficult to spread
Ensure the product is stored at room temperature before use; cold adhesive can become viscous and harder to trowel.
Panels slipping during installation
Check that the layer of adhesive is not too thick and ensure the substrate is clean, dry, and free of heavy dust.
Adhesive drying too quickly
Avoid spreading large areas of adhesive at once if working in high-temperature or low-humidity conditions.
Pros and Cons
Pros
- Compatible with both dry and damp surface conditions
- Superior gap-filling capabilities for uneven walls
- Formulated for hygienic, antimicrobial environments
- High initial tack prevents panel slippage
- Waterproof bond ensures longevity
Cons
- Bulk 12.5kg size may be excessive for small repairs
- Requires proper storage to maintain shelf life
- Professional application technique required for best results
Setup, Compatibility & Care
To prepare for installation, ensure that the ambient temperature is within the manufacturer's recommended range for optimal curing. The product is designed for direct application to standard building substrates. Always check that the wall surface is structurally sound before applying the adhesive.
Care Instructions:
- Keep the container tightly sealed when not in use to prevent the adhesive from drying out.
- Store in a cool, dry place away from direct sunlight.
- Clean any excess adhesive from panel faces or tools immediately with a suitable solvent or wipe, as it becomes difficult to remove once cured.