Tetrosyl Glass Fibre Matting - TETGFM001PK2
Not Available
Currently unavailable
Currently out of stock
This product is not available at the moment. Check back later or explore other options below.
Product Information
Full details
The Tetrosyl Glass Fibre Matting is an essential solution for automotive DIY enthusiasts and professionals tasked with bridging large holes in vehicle bodywork. When paired with Tetrosyl Polyester Resin, this medium-weight, chopped strand mat creates a robust, structural laminate that restores integrity to damaged car panels. While it provides a highly durable repair, it requires careful handling of resin mixtures and precise application to ensure a smooth, professional finish on complex body curves.
All features
| Model Part Number | TETGFM001PK2 |
|---|---|
| Brand | Tetrosyl |
Extended Product Information
FAQs
Can I use this matting on plastic bumpers?
This matting is designed primarily for metal bodywork. For plastic or flexible bumpers, a specialized flexible repair resin and kit are recommended.
How many layers should I apply?
The number of layers depends on the size of the hole. For most bodywork repairs, two to three layers are sufficient to create a strong bridge.
Do I need to sand the area after the repair?
Yes, once cured, the glass fiber repair will be rough and needs sanding before you apply body filler and paint.
Can I use this for non-automotive repairs?
Yes, it can be used for various fiberglass projects, provided the surface is compatible with polyester resin.
Is the matting reusable?
Once the matting has been mixed with resin and cured, it becomes a permanent solid piece and cannot be reused or reshaped.
Troubleshooting
The resin is not soaking into the matting properly
Ensure you are using a stippling motion with your brush rather than a brushing motion to force the resin into the fibers.
Repair remains soft or sticky after several hours
Check your resin-to-hardener ratio; insufficient hardener will prevent a full cure, or ensure the ambient temperature is not too cold.
Air bubbles trapped under the matting
Use a metal roller or a stiff-bristled brush to press the air bubbles out towards the edges while the resin is still wet.
Pros and Cons
Pros
- Provides high structural rigidity for large bodywork holes
- Easy to cut and shape to fit specific repair areas
- Excellent adhesion when used with standard polyester resins
- Cost-effective alternative to replacing entire body panels
Cons
- Requires proper safety equipment (gloves/mask) during application
- Requires mixing with separate resin, which can be messy
- Not suitable for aesthetic top-layer finishes without sanding and filler
Setup, Compatibility & Care
To ensure the best results, work in a well-ventilated area, preferably between 15°C and 25°C. Before beginning, ensure the repair area is completely dry, free of grease, and abraded with coarse sandpaper to improve grip. Always wear protective gloves and eye protection, as loose glass fibers can be irritating to the skin and eyes.
This matting is fully compatible with Tetrosyl Polyester Resin. After the final layer of resin has cured, the area should be sanded with progressively finer grit paper until the surface is level with the surrounding bodywork. Store unused matting in a dry, cool place inside a sealed bag to prevent moisture absorption, which can compromise the binding process.