Warren Reed Designer Pig In A Hat And Glasses Kitchen Splashback - W900mm x H750mm
Not Available
Currently unavailable
Currently out of stock
This product is not available at the moment. Check back later or explore other options below.
Product Information
Full details
The Warren Reed Designer Glass Kitchen Splashback is for homeowners looking to add both aesthetic appeal and practical protection to their kitchen walls. Its key benefit is providing a durable, easy-to-clean surface with a high-resolution printed design that acts as a striking focal point. A caveat to consider is the specific adhesive required for installation, which must be a clear, natural-curing type.
All features
| Model Part Number | WR00912-P449 |
|---|---|
| Brand | Warren Reed - Designer |
Extended Product Information
FAQs
What type of adhesive should I use?
You should use a clear, natural-curing adhesive. The ColorSpray Splashback Adhesive and Sealant is recommended by the manufacturer.
Can this splashback be installed behind any type of hob?
The splashback is heat resistant up to 400°C, making it suitable for standard cooking heat. Always follow hob manufacturer guidelines and ensure adequate clearance.
How do I clean the glass splashback?
Clean with a damp cloth and a mild kitchen cleaner. Avoid abrasive cleaners or scouring pads to prevent scratching.
What are the available sizes for this splashback?
Sizes available include W600mm x H750mm, W700mm x H750mm, W900mm x H750mm, W600mm x H600mm, 600mm x H650mm, W700mm x H650mm, and W900mm x H650mm.
Is the printed design durable?
Yes, the high-resolution print is applied to toughened glass and is designed to be durable and resistant to normal kitchen use.
What is the warranty period for this product?
The splashback comes with a 1-year guarantee.
Can I cut or drill the splashback myself?
No, this product is pre-sized and should not be cut or drilled after purchase. Modification may compromise its integrity and void the warranty.
Troubleshooting
Adhesive not bonding properly
Ensure the wall surface is clean, dry, and free from dust or grease. Use the recommended clear, natural-curing adhesive and follow application instructions precisely. Check adhesive expiration date.
Glass appears cloudy after cleaning
Avoid using abrasive cleaning products. Use a mild kitchen cleaner or a dedicated glass cleaner with a soft, lint-free cloth. Ensure all cleaner residue is wiped away.
Scratches on the surface
While scratch-resistant, deep scratches can occur with sharp objects. Handle with care during installation and avoid contact with sharp utensils.
Splashback not perfectly flush with the wall
Ensure the wall surface is smooth and flat prior to installation. Small imperfections in the wall may transfer to the glass. Ensure even adhesive application.
Pros and Cons
Pros
- Enhances kitchen aesthetics with unique, high-quality prints.
- Provides excellent protection against splashes and heat.
- Simple to maintain and keep clean.
- Durable construction ensures longevity.
- Installation is straightforward, avoiding the need for drilling.
Cons
- Requires specific adhesive for installation (natural-curing, clear).
- Glass can be heavy, requiring careful handling during installation.
- The printed design might not suit all kitchen styles.
- Limited to wall protection; not suitable for countertops.
- A 1-year guarantee is relatively short for a permanent fixture.
Setup, Compatibility & Care
Setup: For installation, use a clear, natural-curing adhesive. The manufacturer recommends their ColorSpray Splashback Adhesive and Sealant for best results. Ensure the wall surface is clean, dry, and smooth before applying the adhesive. Apply adhesive evenly to the back of the glass or the wall as per the adhesive manufacturer's instructions. Carefully position the splashback and press firmly. Allow the adhesive to cure completely before cleaning or exposing to heat.
Compatibility: This splashback is designed for use on standard kitchen walls, particularly behind hobs and sinks. It is compatible with most kitchen cleaning products. Ensure the wall behind the splashback is suitable for adhesive application.
Care: Clean the glass surface regularly with a damp cloth and a mild kitchen cleaner. Avoid abrasive cleaners or scouring pads, as they may scratch the surface. For stubborn marks, a glass cleaner can be used. Ensure good ventilation during and after cleaning.