CLIQR Motorcycle Mount - Oxford
Not Available
Not Available
Currently unavailable
Currently out of stock
This product is not available at the moment. Check back later or explore other options below.
Product Information
Full details
The Oxford CLIQR Motorcycle Mount is designed for riders who need quick and secure access to their devices, such as GPS units or smartphones, while on the move. Its key benefit is providing an optimal, glanceable viewing position without obstructing controls, featuring a robust dual-locking mechanism for safety. A potential caveat is the reliance on the adhesive adaptor for device attachment, which requires careful application.
All features
| Colour | Black |
|---|---|
| Model Part Number | OX850 |
| Brand | Oxford |
Extended Product Information
FAQs
What is the main advantage of the CLIQR system?
The main advantage is its secure, quick-release system that allows for easy mounting and dismounting of your device, offering an optimal viewing position without obstructing controls.
How do I attach the device adaptor to my phone?
Clean the back of your phone or case, then firmly press the VHB 3M adhesive on the adaptor onto the cleaned surface. For best results, let it cure for 24 hours.
What size handlebars is this mount compatible with?
This specific handlebar mount is designed for handlebars with a diameter of 22mm to 22.5mm.
Can I mount my GPS device and my phone using this system?
Yes, you can mount either a GPS device or a phone. If you wish to use both, you would need a separate CLIQR device adaptor for each item.
Is the mount weather-resistant?
The mount is constructed from durable materials designed for outdoor use. However, prolonged exposure to harsh weather should be considered, and it's advisable to protect electronic devices from heavy rain.
What happens if the VHB tape loses adhesion over time?
If the VHB tape loses adhesion, you can purchase replacement VHB 3M tape and reapply it to the device adaptor after thoroughly cleaning the device surface.
Can the mount hold a tablet?
This mount is designed for phones, GPS devices, and compact action cameras. It is generally not recommended for tablets due to their size and weight, which may exceed the mount's capacity.
Troubleshooting
Device mount feels loose on the handlebar
Ensure the M5 bolt is fully tightened and the hinged clamp is securely closed around the handlebar. Verify the handlebar diameter is within the 22-22.5mm range.
Device adaptor not sticking well to the device
Re-clean the back of the device with an alcohol wipe, ensuring it is completely dry and free of oils or dust. Reapply the adaptor with firm pressure for at least 30 seconds. Allow 24 hours for the adhesive to cure before mounting.
Device easily detaches from the mount
Confirm the device is correctly aligned and pushed down firmly until the dual locking mechanism engages. Ensure no debris is obstructing the connection points on both the device adaptor and the mount base.
Mounting bracket interferes with handlebar controls
Adjust the position of the mount along the handlebar. Try mounting on the opposite side of the controls if space allows, or consider alternative mounting locations if available on your motorcycle.
Pros and Cons
Pros
- Durable and lightweight construction from glass-filled nylon.
- Secure device attachment via a dual locking mechanism.
- Versatile compatibility with various devices using the universal adaptor.
- Easy and quick installation on compatible handlebars.
- Adjustable viewing angles (landscape/portrait) for user convenience.
Cons
- Requires adhesive adaptor to be attached to the device.
- Limited to handlebars within a specific diameter range (22-22.5mm).
- Adhesive bond strength depends on proper surface preparation.
- Not suitable for extremely heavy or oversized devices.
- Secondary purchase might be needed if multiple devices are to be mounted.
Setup, Compatibility & Care
Setup:
- Prepare Device: Clean the back of your device or phone case thoroughly with an alcohol wipe. Ensure it is completely dry.
- Apply Adaptor: Peel the backing off the VHB 3M tape on the CLIQR device adaptor and firmly press it onto the cleaned surface of your device. Apply firm pressure for at least 30 seconds.
- Allow Adhesive to Cure: For optimal adhesion, let the adaptor sit on the device for a minimum of 24 hours before first use.
- Mount to Handlebar: Loosen the M5 bolt on the CLIQR Handlebar Mount. Place the hinged clamp around your handlebar (22-22.5mm diameter). Secure the clamp by tightening the M5 bolt and then closing the hinge.
- Attach Device: Align the CLIQR adaptor on your device with the mount base and push down until it clicks and locks into place.
Compatibility:
- Handlebars: Compatible with 22mm and 22.5mm diameter handlebars.
- Devices: Most smartphones, GPS devices, and compact action cameras. The device must have a flat surface suitable for the adhesive adaptor.
Care:
- Regularly check that the handlebar mount is securely fastened.
- Clean the mount with a soft, damp cloth. Avoid abrasive cleaners.
- Ensure the device adaptor is clean and free from debris, which could affect the adhesive bond over time.