Permatex Threadlocker - Red - 10ml
Not Available
Currently unavailable
Currently out of stock
This product is not available at the moment. Check back later or explore other options below.
Product Information
Full details
This guide is for users seeking a high-strength threadlocker for permanent applications. Permatex Threadlocker Red provides a robust solution for securing threaded connections and press fits, offering superior resistance to vibration and loosening. Keep in mind that disassembly often requires heat or special tools.
All features
| Colour | Red |
|---|---|
| Model Part Number | 12063 |
| Brand | Permatex |
Extended Product Information
FAQs
What is Permatex Threadlocker Red used for?
It is designed for permanently locking threaded connections from 10 to 25 mm.
Can I remove the fastener if needed?
Yes, but disassembly usually requires heat (e.g., from a heat gun or torch) and/or special tools.
What temperature range can it withstand?
It can withstand high temperatures up to 232°C.
Is it resistant to chemicals?
Yes, it resists most chemicals.
How do I apply it?
Apply the threadlocker to the threads of the fastener before assembly.
Does it replace other locking methods?
Yes, it acts as a replacement for conventional securing means like closing, spring washers, and nyloc.
What is the holding power?
It adds 3,000 PSI holding power on slip and press fit assemblies.
Troubleshooting
Fastener is difficult to remove.
Apply heat to the fastener with a heat gun or torch. Use appropriate tools to remove the fastener while it is hot.
Threadlocker is not holding.
Ensure surfaces were properly cleaned and prepped. Confirm the correct product was used for the application, and the fastener was tightened to the proper torque.
Pros and Cons
Pros
- Provides a strong, permanent bond.
- Prevents loosening due to vibration and shock.
- Offers excellent resistance to many chemicals.
- Acts as a replacement for mechanical locking methods.
- Suitable for high-temperature applications.
Cons
- Requires heat or special tools for disassembly.
- Not suitable for connections that require frequent removal.
- Can be difficult to remove if over-applied.
Setup, Compatibility & Care
- Surface Preparation: Ensure the surfaces are clean and free of oil, grease, and dirt.
- Application: Apply the threadlocker to the threads of the fastener.
- Assembly: Assemble the components and tighten to the manufacturer's specifications.
- Curing: Allow the threadlocker to cure fully before subjecting the assembly to stress. Cure times vary depending on temperature.
Compatibility: This product is compatible with most metals.
Care: Store in a cool, dry place. Avoid prolonged exposure to direct sunlight. Always follow safety guidelines for chemical products, including wearing appropriate gloves and eye protection.