Parallel Pin Punch Set - Laser 880 - 5 Pieces Imperial
Not Available
Currently unavailable
Currently out of stock
This product is not available at the moment. Check back later or explore other options below.
Product Information
Full details
The Laser 880 Parallel Pin Punch Set is designed for mechanics and DIY enthusiasts who need to accurately remove or install pins and rivets. Its key benefit is providing a range of commonly used imperial sizes in a durable set for precise work. A potential caveat is that it is focused solely on imperial sizes, which may require additional metric sets for broader applications.
All features
| Model Part Number | 880 |
|---|---|
| Brand | Laser |
Extended Product Information
FAQs
What materials are these punches made from?
While specific material composition is not detailed, these are designed as robust tools for mechanical use, implying hardened steel construction suitable for impact and wear.
Can these be used for anything other than removing pins?
Primarily designed for parallel pins, they can also be used for starting rivets or as general-purpose punches for marking or light chiseling if absolutely necessary, though dedicated tools are recommended for those tasks.
What is the difference between parallel and taper punches?
Parallel punches have a consistent diameter along the working end, providing direct, even force. Taper punches have a conical end, useful for starting pins in slightly misaligned holes.
Are these punches magnetic?
The magnetic properties are not specified. However, many steel tools of this nature can be slightly magnetic.
How should I store this set?
It is recommended to store the punches in a dry, organized manner, such as in a tool roll, drawer, or holder to prevent loss and protect the tips.
Can I use these with an impact wrench?
No, these punches are designed to be struck with a hammer. Using them with power tools like an impact wrench could cause severe damage to the punch and potentially result in injury.
What is the overall length of the punches?
The overall length of each punch is approximately 210mm.
Troubleshooting
Punch not removing pin effectively
Ensure you are using the correct punch size. The punch tip should be slightly smaller than the pin. Apply consistent, direct force with a hammer. Check if the pin is seized or if there is corrosion; a penetrating lubricant might help.
Punch appears to be bending or mushrooming
This can occur if excessive force is applied or if the punch is not struck squarely. Ensure you are hitting the punch directly in line with its shaft. If the punch is damaged, discontinue use and replace it to avoid further issues or injury.
Difficulty inserting a new pin
Ensure the hole is clean and free of debris. Use the correct size punch to gently tap the pin into place, ensuring it remains straight. A light application of lubricant might aid insertion.
Pros and Cons
Pros
- Durable construction for long-term use.
- Includes the most common imperial pin sizes.
- Parallel design ensures accurate and controlled impact.
- Overall length provides good leverage and control.
Cons
- Limited to imperial sizes; metric sizes not included.
- May be overkill for occasional light-duty tasks.
- No specific storage case mentioned, requiring separate organization.
Setup, Compatibility & Care
Setup: No specific setup is required for the Laser 880 Parallel Pin Punch Set. The punches are ready for immediate use upon unboxing.
Compatibility: This set is designed for use with imperial-sized pins and rivets. Ensure the tip diameter of the punch is slightly smaller than the pin or hole you are working with to allow for easy insertion and removal. It is compatible with standard striking hammers.
Care: To maintain the longevity and performance of your punches:
- Clean the punches after each use to remove any debris or grease.
- Store the set in a dry environment to prevent rust.
- Avoid using excessive force or striking the punches with inappropriate tools, which could lead to damage.
- Periodically check for any signs of wear or damage.